Supra oil capacity 7 quarts?? Need dipstick measurements, please!

bigshooter44 · 03-04-2011, 02:21 AM

my 86.5 supra takes 7 quarts before the dipstick begins to read. i am thinking that my dipstick or dipstick tube is the wrong length? it would be great if you could supply me with measurements of the dipstick and dipstick tube. thans!!

cre · 03-04-2011, 11:26 AM

Absolute capacity is 5.2 US qts.; You don't see that much come out or go in after an oil change though.

http://www.cygnusx1.net/Supra/Librar....aspx?S=A&P=35

Are there any aftermarket components on the vehicle which may account for the higher capacity? Oil cooler, an accusump perhaps?

This belongs in the MKIII Generation discussion forum, I'll move it there.

Is the stick still relatively straight? The tube doesn't enter at oil level and a significant curve may cause a low reading.

bigshooter44 · 03-05-2011, 02:47 PM

well we dident put any after market parts on besides a new oil pan, but it was identical to the original one. we dry filled it with the new oil pan to 7 quarts before the dipstick showed anything.
and thanks. im new to this forum thing lol

cre · 03-05-2011, 08:53 PM

Heh, you didn't use a gasket on the pan, did you?

Well, I'd love to check measurements for you, but I don't have one any more. Hopefully someone will run out and check theirs for you though.

bigshooter44 · 03-06-2011, 04:53 AM

nope, just a sealer. but that wouldn't account for the 2 extra quarts... but thanks!! i think im going to just drain it, put 5.2 quarts in and make a new dipstick

cre · 03-06-2011, 06:30 AM

Lol, do you have a pic of the dipstick? I think I might actually know the bends in the handle by heart.

No, a gasket wouldn't account for the extra oil.. not by a long shot. I presume it would be too much to hope for that there's a part number stamped on it, huh?

03-04-2011, 02:21 AM	#1
bigshooter44 Stock Join Date: Mar 2011 Location: United States Posts: 8	Supra oil capacity 7 quarts?? Need dipstick measurements, please! my 86.5 supra takes 7 quarts before the dipstick begins to read. i am thinking that my dipstick or dipstick tube is the wrong length? it would be great if you could supply me with measurements of the dipstick and dipstick tube. thans!!

03-04-2011, 11:26 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Absolute capacity is 5.2 US qts.; You don't see that much come out or go in after an oil change though. http://www.cygnusx1.net/Supra/Librar....aspx?S=A&P=35 Are there any aftermarket components on the vehicle which may account for the higher capacity? Oil cooler, an accusump perhaps? This belongs in the MKIII Generation discussion forum, I'll move it there. Is the stick still relatively straight? The tube doesn't enter at oil level and a significant curve may cause a low reading. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> Last edited by cre; 03-04-2011 at 11:30 AM.

03-05-2011, 08:53 PM	#4
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Heh, you didn't use a gasket on the pan, did you? Well, I'd love to check measurements for you, but I don't have one any more. Hopefully someone will run out and check theirs for you though. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

03-06-2011, 06:30 AM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Lol, do you have a pic of the dipstick? I think I might actually know the bends in the handle by heart. No, a gasket wouldn't account for the extra oil.. not by a long shot. I presume it would be too much to hope for that there's a part number stamped on it, huh? __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Begginer to SUPRA and cars, I GOT A FREE SUPRA, PLEASE HELP!!	89MkiiiSupra	Non-Generation Specific Questions	5	06-01-2010 06:48 AM
Kill Board!	Isphius	Show n Tell	95	01-25-2010 05:05 AM
Questions about MKIV Supra	ukno0003	MKIV Supra	5	11-06-2008 10:53 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
new here and thinking about getting a Supra	WhisPer	MKIV FAQ	20	03-17-2007 01:35 PM

03-05-2011, 02:47 PM	#3
bigshooter44 Stock Join Date: Mar 2011 Location: United States Posts: 8	well we dident put any after market parts on besides a new oil pan, but it was identical to the original one. we dry filled it with the new oil pan to 7 quarts before the dipstick showed anything. and thanks. im new to this forum thing lol

03-06-2011, 04:53 AM	#5
bigshooter44 Stock Join Date: Mar 2011 Location: United States Posts: 8	nope, just a sealer. but that wouldn't account for the 2 extra quarts... but thanks!! i think im going to just drain it, put 5.2 quarts in and make a new dipstick