|
|
01-23-2011, 01:16 AM
|
#2 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
  |
Replacing the motor isn't easy. It's just as difficult to pull the whole regulator out with the motor as it is to separate the two still inside the door. If it's rolling up half way easily then your problem is more likely the regulator.
Look at the wiring diagram and try jumping the motor with a 12V source for both up and down. Then try it with someone helping move the glass and to see if they can feel any notchiness to the movement. If they push/pull too hard is may hide the trouble area you're looking for. I'll found that the nylon rollers on the regulator often either flatten out or break off at this age, then the moving armature hangs up on the edge of the track anywhere that the lip has begun getting chewed up.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| HELP PLEASE | Nick0887 | Non-Generation Specific Questions | 4 | 02-28-2009 07:26 AM |
| Passenger Power Window Problems | JanusDuo | Non-Generation Specific Questions | 1 | 12-17-2008 08:11 PM |
| passenger window wont open | tone loc | MKIII Supra | 3 | 06-25-2007 10:37 AM |
| some f*ck broke my passenger window | D_Train | MKIII Supra | 9 | 04-29-2007 09:07 PM |
| Passenger side window | kewlcoconut | MKIII Supra | 1 | 03-29-2006 07:58 AM |
Threaded Mode