My First Build

907mge · 01-04-2011, 09:07 AM

What hg did you use? Brand?
Was the head flat as it should be?

I did mine a few thousand miles ago. I did:

arp head studs 90ft/lbs
permatex copper spray
felpro hg
retorque after a few heat cycles

Cameroonski · 01-04-2011, 11:21 AM

Quote:

Originally Posted by 907mge

What hg did you use? Brand?
Was the head flat as it should be?

I did mine a few thousand miles ago. I did:

arp head studs 90ft/lbs
permatex copper spray
felpro hg
retorque after a few heat cycles

I used JIS rebuild kit. and i had the head milled.

thats what i did. except the copper spray, how does that work?
i guess ill just replace it and hope it doesnt happen again.

907mge · 01-04-2011, 11:32 AM

I don't know about the JIS gasket kit. Aren't they sold on ebay? I wouldn't worry except for the hg, I wouldn't skimp there. The felpro kit is like $220 on rockauto.com and from what I saw when I put it in, it is of quality equal to oem. The spray is sold at almost every parts store and should be applied to both sides of the gasket before install.

Cameroonski · 01-04-2011, 11:42 AM

i hope not.. lol. i forgot which website i got it on but i didnt get it from ebay.

ill go for a high quality felpro or something hg. get some of that spray. and hope i dont scratch up all my pretty paint in the process. lol.

and torque it to 95 again.

Thanks for your help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7MGTE Build up suggestions 350hp - 400hp	Supra Saiyan	MKIII Supra	18	08-07-2010 03:12 AM
Cannot build up boost :(	azerty	MKIII Supra	4	04-22-2009 03:56 AM
3.4 bored out stroked supra build	Fredy171787	MKIII Supra	2	04-12-2008 03:10 PM
Mad Carbon Build Up	supraman121	MKIII Supra	2	04-24-2007 04:22 PM
Engine build...	h8z2luze	MKIII Supra	5	12-08-2006 03:55 AM

01-04-2011, 09:07 AM	#1
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	What hg did you use? Brand? Was the head flat as it should be? I did mine a few thousand miles ago. I did: arp head studs 90ft/lbs permatex copper spray felpro hg retorque after a few heat cycles

01-04-2011, 11:32 AM	#3
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	I don't know about the JIS gasket kit. Aren't they sold on ebay? I wouldn't worry except for the hg, I wouldn't skimp there. The felpro kit is like $220 on rockauto.com and from what I saw when I put it in, it is of quality equal to oem. The spray is sold at almost every parts store and should be applied to both sides of the gasket before install.

01-04-2011, 11:42 AM	#4
Cameroonski 3" Exhaust Join Date: Dec 2009 Location: Austin, Tx Posts: 68	i hope not.. lol. i forgot which website i got it on but i didnt get it from ebay. ill go for a high quality felpro or something hg. get some of that spray. and hope i dont scratch up all my pretty paint in the process. lol. and torque it to 95 again. Thanks for your help!