Starting issue

Green7mgte · 12-06-2010, 06:11 AM

EFI ohmmeter troubleshooting

eh dont know if thats gonna be helpful

mkiiisupra · 12-06-2010, 02:30 PM

When mine doesn't start up right away i have to jiggle the cps wires then she starts right up.

Bru · 12-06-2010, 06:22 PM

I had the same cam position sensor wiring problem in the past too. It went away when I replaced the sensor. I recently rebuilt the sensor using a kit from kbox because the internal oil seal was leaking oil out through the front cover. I made an aluminum foil "cup" to catch the oil drips before I installed the kit. Installing the kit is not for the faint of heart, it takes some skills. I can describe my experience anyone's interested.

Green7mgte · 12-07-2010, 04:29 AM

what?

a rebuild kit? you mean a new dust cover packing gasket and an o ring?
yea i bought that to.. 10 bucks from Toyota.

Bill UK · 12-07-2010, 11:23 AM

I think Bru is referring to a kit that includes an internal oil seal, bearing and drive gear, (total strip down job) I’ve only seen them available from a company in the US. Bru will know them I’m sure.

12-06-2010, 06:11 AM	#1
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	EFI ohmmeter troubleshooting eh dont know if thats gonna be helpful __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

12-06-2010, 02:30 PM	#2
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	When mine doesn't start up right away i have to jiggle the cps wires then she starts right up. __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

12-06-2010, 06:22 PM	#3
Bru Bone Stock w Upgrades ;-) Join Date: Apr 2010 Location: Tampa Bay Posts: 214	I had the same cam position sensor wiring problem in the past too. It went away when I replaced the sensor. I recently rebuilt the sensor using a kit from kbox because the internal oil seal was leaking oil out through the front cover. I made an aluminum foil "cup" to catch the oil drips before I installed the kit. Installing the kit is not for the faint of heart, it takes some skills. I can describe my experience anyone's interested. Last edited by Bru; 12-06-2010 at 06:25 PM.

12-07-2010, 04:29 AM	#4
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	what? a rebuild kit? you mean a new dust cover packing gasket and an o ring? yea i bought that to.. 10 bucks from Toyota. __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines : Last edited by Green7mgte; 12-07-2010 at 04:36 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
starting issue 88 supra automatic w/turbo help!	ricerbaby	MKIII Supra	2	04-15-2011 06:25 PM
vacuum lock issue?	supraluver4life	MKIII Supra	8	08-07-2010 10:54 PM
Starting Issue	supraman8188	MKIII Supra	1	06-28-2010 04:01 AM
Engine Run-on Issue	gottadiesel	MKIII Supra	1	04-02-2009 07:26 AM
engine noise car dies after starting	tex1116	MKIII Supra	7	11-18-2005 06:47 PM

12-07-2010, 11:23 AM	#5
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	I think Bru is referring to a kit that includes an internal oil seal, bearing and drive gear, (total strip down job) I’ve only seen them available from a company in the US. Bru will know them I’m sure.