MKIII Timing belt adjustment help

[Sonyps307]

Get a timing light and check the timing

[CanadianBak'inSupra]

Originally Posted by Sonyps307

Get a timing light and check the timing

before you can do anything with a timing light. you have to have a timing belt installed and alligned correctly...

but yes a timing light is a very handy thing to have. and should be used to set your dist. timing when finished with your belt.

[xAimz]

well timing was at 12, now i gotta get a better cam shaft sensor

[Bill UK]

12 deg with or without the check connector link ? and why replace the CPS ? just rotate it, as state in 8 (c) Link

[xAimz]

Originally Posted by Bill UK

12 deg with or without the check connector link ? and why replace the CPS ? just rotate it, as state in 8 (c) Link

guy said the cam shaft sensor might be bad, but engine runs good, except for the starting issue :/

[btwilson86]

Originally Posted by xAimz

guy said the cam shaft sensor might be bad, but engine runs good, except for the starting issue :/

Yeah....... As Bill UK said, set the CPS. It's adjustable. Or you can go waste your money on a new one and STILL have to set it the exact same way...