7mg rebuild kit ??

johnvin · 10-16-2010, 03:58 AM

ok i wont thanks for the tip bro! well i took off the oil filter and there was not any oil in there so maybe its the oil pump. but the wird thing is that i took out the dip stick and there was oil in there

907mge · 10-16-2010, 10:19 PM

The oil filter is much higher up on the block

johnvin · 10-18-2010, 01:20 PM

so it would not be the oil pump
then ?

907mge · 10-19-2010, 01:08 AM

No oil at all?

Sonyps307 · 10-19-2010, 01:48 AM

I just changed my oil and filter when I drianed it then change the filter it just had a little bit of oil in it unlike some cars oil comes pouring out the oil filter I guess it drains out And my motor is just rebuild with no leaks and new oil pump

907mge · 10-19-2010, 02:06 AM

The filter is high on the block and on its side it should drain fairly quick. As long as the filter has oil in it it should be fine.

Sonyps307 · 10-19-2010, 02:12 AM

Unless it's a turbo and it has that 90 degree thing and screws in the bottom

Sonyps307 · 10-19-2010, 02:30 AM

I don't know if it's the ge or gte he never stated I'm just guessing

907mge · 10-19-2010, 02:41 AM

What are we talking about ? I am so confused

johnvin · 10-19-2010, 01:23 PM

ya bro same here there was no oil in there at all like one of you guys had said it must just drain back down in to the block because its located up so high.
i was told that it might be the rod bearings that might be making that really loud knocking noise when it runs ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1986 Turbo Automatic Transmission Rebuild?	professorbob	MKIII Supra	2	01-26-2012 01:06 AM
7mgte rebuild questions	bradenman1	MKIII Supra	0	05-27-2010 03:36 PM
Replace or Rebuild a 7mge	cbrewster	MKIII Supra	2	03-19-2009 10:20 PM
To rebuild or not to rebuild that is the question	88supraturbo5speed	Non-Generation Specific Questions	6	04-21-2008 04:05 PM

10-16-2010, 03:58 AM	#1
johnvin 3" Exhaust Join Date: Sep 2010 Location: Clayton WI Posts: 75	ok i wont thanks for the tip bro! well i took off the oil filter and there was not any oil in there so maybe its the oil pump. but the wird thing is that i took out the dip stick and there was oil in there

10-16-2010, 10:19 PM	#2
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	The oil filter is much higher up on the block

10-18-2010, 01:20 PM	#3
johnvin 3" Exhaust Join Date: Sep 2010 Location: Clayton WI Posts: 75	so it would not be the oil pump then ?

10-19-2010, 01:08 AM	#4
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	No oil at all?

10-19-2010, 01:48 AM	#5
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	I just changed my oil and filter when I drianed it then change the filter it just had a little bit of oil in it unlike some cars oil comes pouring out the oil filter I guess it drains out And my motor is just rebuild with no leaks and new oil pump

10-19-2010, 02:06 AM	#6
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	The filter is high on the block and on its side it should drain fairly quick. As long as the filter has oil in it it should be fine.

10-19-2010, 02:12 AM	#7
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	Unless it's a turbo and it has that 90 degree thing and screws in the bottom

10-19-2010, 02:30 AM	#8
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	I don't know if it's the ge or gte he never stated I'm just guessing

10-19-2010, 02:41 AM	#9
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	What are we talking about ? I am so confused

10-19-2010, 01:23 PM	#10
johnvin 3" Exhaust Join Date: Sep 2010 Location: Clayton WI Posts: 75	ya bro same here there was no oil in there at all like one of you guys had said it must just drain back down in to the block because its located up so high. i was told that it might be the rod bearings that might be making that really loud knocking noise when it runs ?