89 passenger headlight assembly?

alarsen77 · 09-21-2010, 12:53 PM

Hey guys. So I hit a deer last night and my passenger headlight when closed sits back from the front bumper about 1/2 an inch or more and the back is pushed under the hood. Is there any way to fix that easily? Or is there anywhere I can get the passenger headlight assembly?

Sonyps307 · 09-21-2010, 01:27 PM

Flip up the lights and take off the black part and there is 4 screws u can move the top back to the way it was unless the whole light was pushed back

alarsen77 · 09-21-2010, 01:30 PM

Awesome thanks for the advice I will try this later when I get home from work.

alarsen77 · 09-21-2010, 02:14 PM

Just went out and tried that and it doesn't adjust enough that way I think the whole assembly was pushed back a bit.

CanadianBak'inSupra · 09-21-2010, 11:01 PM

find parts or grab a hammer.

MJG · 09-22-2010, 02:43 AM

I saw some headlight assemblies on EbayMotors today.
This may be of interest to you.

Travis89Turbo · 09-22-2010, 03:07 AM

Quote:

Originally Posted by CanadianBak'inSupra

find parts or grab a hammer.

+++1 on the hammer

If it bent one way it should bend back with enough persuasion and if u can get to the piece thats broken out of the car would be best....or junkyard it.. but if its like around here supras don't end up in junkyards.

09-21-2010, 12:53 PM	#1
alarsen77 Stock Join Date: Sep 2010 Location: Mount Bethel, PA Posts: 12	89 passenger headlight assembly? Hey guys. So I hit a deer last night and my passenger headlight when closed sits back from the front bumper about 1/2 an inch or more and the back is pushed under the hood. Is there any way to fix that easily? Or is there anywhere I can get the passenger headlight assembly? Last edited by alarsen77; 09-21-2010 at 12:57 PM. Reason: Spelling

09-21-2010, 11:01 PM	#5
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	find parts or grab a hammer. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Passenger Power Window Problems	JanusDuo	Non-Generation Specific Questions	1	12-17-2008 08:11 PM
MKIII Headlight Problem	Supra275	Non-Generation Specific Questions	4	09-05-2008 09:06 PM
Headlight Assembly Interchange?	bmoore	MKIII Supra	5	06-19-2006 06:55 AM

09-21-2010, 01:27 PM	#2
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	Flip up the lights and take off the black part and there is 4 screws u can move the top back to the way it was unless the whole light was pushed back

09-21-2010, 01:30 PM	#3
alarsen77 Stock Join Date: Sep 2010 Location: Mount Bethel, PA Posts: 12	Awesome thanks for the advice I will try this later when I get home from work.

09-21-2010, 02:14 PM	#4
alarsen77 Stock Join Date: Sep 2010 Location: Mount Bethel, PA Posts: 12	Just went out and tried that and it doesn't adjust enough that way I think the whole assembly was pushed back a bit.

09-22-2010, 02:43 AM	#6
MJG 3" Exhaust Join Date: Mar 2010 Location: Washington State Posts: 125	I saw some headlight assemblies on EbayMotors today. This may be of interest to you.