89 passenger headlight assembly?
 

Hey guys. So I hit a deer last night and my passenger headlight when closed sits back from the front bumper about 1/2 an inch or more and the back is pushed under the hood. Is there any way to fix that easily? Or is there anywhere I can get the passenger headlight assembly?

Flip up the lights and take off the black part and there is 4 screws u can move the top back to the way it was unless the whole light was pushed back

Awesome thanks for the advice I will try this later when I get home from work.

Just went out and tried that and it doesn't adjust enough that way I think the whole assembly was pushed back a bit.

find parts or grab a hammer.

I saw some headlight assemblies on EbayMotors today.
This may be of interest to you.

+++1 on the hammer

If it bent one way it should bend back with enough persuasion and if u can get to the piece thats broken out of the car would be best....or junkyard it.. but if its like around here supras don't end up in junkyards.

Take some measurements. It's plenty likely that the radiator support was bent.

I looked at it some more when I got home. It is the radiator support that bent a bit on the passenger side. I am going to see if we can bend it back.