Where to buy a Driveshaft Center Support Bearing 1986.5 NA-5spd

dlfred · 03-21-2011, 10:33 AM

O'Reilly bearing was incorrect for my car. The driveshaft shop ordered a inner bearing /rubber and peeled open the old carrier and installed the new insert. He said as long as the outer carrier was not damaged it would be fine.

5000 miles later, he was right. The carrier is working fine and even held up during the time I had a u-joint go out.

$45 is what the bearing cost me.

vbryanv · 03-23-2011, 07:50 PM

I was reading on another fourm about some using a bearing from a 92' Ford Ranger 3.0L, Napa part number HB209-KF, that you can also get from rock auto cheaper. The guy said it worked with no mod to the bearing, just had to add a steal bar acroos the bottom of the bearing due to the fact that the ford bearing insulation gets bolted to the crossmember and has nothing to hold the insuation in place.

I have not tried it yet, but i do plan on it.

Sonyps307 · 03-23-2011, 10:39 PM

Driftmtion.com sells the center bearing for like around 200$

03-21-2011, 10:33 AM	#1
dlfred 3" Exhaust Join Date: Mar 2010 Location: Georgia Posts: 66	Cheaper Driveshaft Support Bearing O'Reilly bearing was incorrect for my car. The driveshaft shop ordered a inner bearing /rubber and peeled open the old carrier and installed the new insert. He said as long as the outer carrier was not damaged it would be fine. 5000 miles later, he was right. The carrier is working fine and even held up during the time I had a u-joint go out. $45 is what the bearing cost me. __________________ 1986 Supra 3.0 NA Stock 5 Spd. Lexus rims 16 x 7

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Driveshaft and center support bearing vibration	BillW	MKIII Supra	10	03-03-2010 01:51 AM
can i get some info on the center support bearing??	JZA70dood	MKIII Supra	6	08-03-2009 04:01 PM
1986.5 na 5spd not starting help..	1986.5 targo	MKIII Supra	8	02-21-2008 12:56 AM
Center Support Bearing Problem	purplescott	MKIII Supra	0	03-27-2006 10:17 PM

03-23-2011, 07:50 PM	#2
vbryanv 3" Exhaust Join Date: Apr 2010 Location: new jersey Posts: 57	I was reading on another fourm about some using a bearing from a 92' Ford Ranger 3.0L, Napa part number HB209-KF, that you can also get from rock auto cheaper. The guy said it worked with no mod to the bearing, just had to add a steal bar acroos the bottom of the bearing due to the fact that the ford bearing insulation gets bolted to the crossmember and has nothing to hold the insuation in place. I have not tried it yet, but i do plan on it.

03-23-2011, 10:39 PM	#3
Sonyps307 Lexus & 550's Join Date: May 2010 Location: Baltimore Posts: 526	Driftmtion.com sells the center bearing for like around 200$