Where to add RTV sealant to valve covers on 7M engine

907mge · 04-29-2010, 11:37 PM

good job posting the same thing

trevor217 · 04-30-2010, 02:49 AM

Thanks for the responses everyone! That answers my question perfectly.

Now if the weather holds up this weekend I will finally get these new gaskets installed...

Trevor

907mge · 04-30-2010, 03:02 AM

also if you can find them, you should get new washers(rubber and metal) since the ones on there now go totally flat
http://www.rockauto.com/catalog/raframecatalog.php

felpro makes a set of them for $15 i used

es72133 is the part number

cvbikeguy · 05-02-2010, 05:53 PM

Quote:

Originally Posted by 907mge

good job posting the same thing

lol 4 min. apart. i we must have been posting at the same time. my bad

04-30-2010, 02:49 AM	#2
trevor217 Stock Join Date: Dec 2007 Location: Pt.Pleasant, NJ Posts: 20	Thanks for the responses everyone! That answers my question perfectly. Now if the weather holds up this weekend I will finally get these new gaskets installed... Trevor __________________ MKIII 7M-GTE stock

04-30-2010, 03:02 AM	#3
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	also if you can find them, you should get new washers(rubber and metal) since the ones on there now go totally flat http://www.rockauto.com/catalog/raframecatalog.php felpro makes a set of them for $15 i used es72133 is the part number Last edited by 907mge; 04-30-2010 at 03:04 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rebuilt hard to crank (high engine resistance); need advice	cbrewster	MKIII Supra	4	09-28-2009 04:52 PM
engine oil sump sealant?	nzskate	MKIV Supra	1	04-08-2009 12:07 AM
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
Valve stem seals?	Kuban	MKIII Supra	9	03-27-2007 02:32 AM

04-29-2010, 11:37 PM	#1
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	good job posting the same thing