Legit 7M upgrades

Supra Saiyan · 03-14-2010, 09:19 PM

This is one I was looking at team. The cost is $2599.

7MGE/7MGTE Stroker Kits Include:

IPP's Forged Crank
Stock Stroke (3.583", 91mm)
New Stroke (3.833", 97.5mm)

Custom Forged Pistons
(any comp & diam)

Forged Steel Pins
(see upgrade option below)

Piston Pin Locks

Plasma Moly Racing Rings

4340 H-Beam Rods
(see upgrade option below)

Toga Performance Main Bearings

Toga Performance Rod Bearings

Comes balanced

It's 6.5mm more stroke that when added to the increased bore equals 665cc more cubes of usable power!
Our stroker kit increases torque as much as 30% and 45 Horse Power (much more can be achieved with other HP increasing accessories). This means more pulling and launching power. This can be used with factory FI or Turbos (adjustments in fuel supply may be needed). After 4 months of Dyno Testing, our non-turbo DOHC motor produced 259 HP and 247lbs of torque. The Turbo produced 320HP and 315 lbs of Torque. Both figures were produced with only the Stroker Kit. As an option, much higher figures can be achieved with additional parts added to the engine.

Stock 1992 Non-Turbo HP is 190 @ 5600rpm 1888 ft/lbs torque .
Turbo is 232 HP @ 5600rpm with 254 torque.

Your engine before & after!
With Original CC's = 2954cc's (Stock Bore 3157cc)
With new Crank .060 = 3271cc's (non-turbo)

That's a 328cc+ increase for Non-Turbo motors!

http://www.importperformanceparts.ne...s_toyota2.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please check this to see if deal is legit	lawjai	Non-Generation Specific Questions	6	08-25-2006 12:51 PM
lexus parts for supra upgrades	TargaMKII	MKII Supra	2	04-06-2006 12:57 AM
upgrades	twd420	MKIII Supra	1	03-16-2006 08:56 PM
Best upgrades for 7mge	KingT916	MKIII Supra	2	01-17-2006 04:12 AM
Upgrades	dcrusupra	MKIII Supra	3	10-07-2005 02:01 PM

03-14-2010, 09:19 PM	#2
Supra Saiyan 3" Exhaust Join Date: Feb 2010 Location: Oregon Posts: 225	This is one I was looking at team. The cost is $2599. 7MGE/7MGTE Stroker Kits Include: IPP's Forged Crank Stock Stroke (3.583", 91mm) New Stroke (3.833", 97.5mm) Custom Forged Pistons (any comp & diam) Forged Steel Pins (see upgrade option below) Piston Pin Locks Plasma Moly Racing Rings 4340 H-Beam Rods (see upgrade option below) Toga Performance Main Bearings Toga Performance Rod Bearings Comes balanced It's 6.5mm more stroke that when added to the increased bore equals 665cc more cubes of usable power! Our stroker kit increases torque as much as 30% and 45 Horse Power (much more can be achieved with other HP increasing accessories). This means more pulling and launching power. This can be used with factory FI or Turbos (adjustments in fuel supply may be needed). After 4 months of Dyno Testing, our non-turbo DOHC motor produced 259 HP and 247lbs of torque. The Turbo produced 320HP and 315 lbs of Torque. Both figures were produced with only the Stroker Kit. As an option, much higher figures can be achieved with additional parts added to the engine. Stock 1992 Non-Turbo HP is 190 @ 5600rpm 1888 ft/lbs torque . Turbo is 232 HP @ 5600rpm with 254 torque. Your engine before & after! With Original CC's = 2954cc's (Stock Bore 3157cc) With new Crank .060 = 3271cc's (non-turbo) That's a 328cc+ increase for Non-Turbo motors! http://www.importperformanceparts.ne...s_toyota2.html