maft question

Green7mgte · 03-07-2010, 11:20 PM

lol. that made me laugh

cre · 03-08-2010, 01:06 AM

ROFL! Man, I was just screwing with you... yeah... there is an odd pattern of me ending threads by replying to them. I hope it's because I've satisfactorily answered the questions, but sometimes I wonder if it's just because everyone else is fed up.

Anyway. You'll have to forgive me, I'm not completely up on what features the Gen II does have and doesn't have that the Pro does. With WOT tracking you tell the Gen II when it's supposed to start tracking for a given AFR by TPS voltage. This doesn't mean you can have the Gen II take over before the ECU is in open loop itself (~2.70v). If the Gen II has it you can use the ETPS feature to send the ECU a WOT signal so the ECU goes into open loop prematurely. You can set values for TPS voltage or RPM. Gain controls how quickly it raises the real TPS signal to the specified WOT voltage.

There's not really anything wrong with the setup you're thinking of as long as you tune it. As the intake gets into the positive pressure range I believe the airflow offset (reported versus actual) will decrease. I never ran a MAF on a turboed setup, on the N/A the offset was bad across the entire range, but predictably so, so I got away with trimming most of it out with one adjustment to the mainscale.

Isn't the stock piping 2"?

cvbikeguy · 03-24-2010, 04:52 AM

ROFL! Man, I was just screwing with you... yeah... there is an odd pattern of me ending threads by replying to them. I hope it's because I've satisfactorily answered the questions, but sometimes I wonder if it's just because everyone else is fed up.
lol

hey cre did you notice a difference putting the maf on your n/a?

03-07-2010, 11:20 PM	#1
Green7mgte Supra Forum Moderator Join Date: Nov 2009 Location: Green-Ohio Posts: 1,297	lol. that made me laugh __________________ 92 Ma71 7mGTE Auto. SafcII Supra FAQ Supra MKIII FAQ Classified Section guidelines :

03-08-2010, 01:06 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	ROFL! Man, I was just screwing with you... yeah... there is an odd pattern of me ending threads by replying to them. I hope it's because I've satisfactorily answered the questions, but sometimes I wonder if it's just because everyone else is fed up. Anyway. You'll have to forgive me, I'm not completely up on what features the Gen II does have and doesn't have that the Pro does. With WOT tracking you tell the Gen II when it's supposed to start tracking for a given AFR by TPS voltage. This doesn't mean you can have the Gen II take over before the ECU is in open loop itself (~2.70v). If the Gen II has it you can use the ETPS feature to send the ECU a WOT signal so the ECU goes into open loop prematurely. You can set values for TPS voltage or RPM. Gain controls how quickly it raises the real TPS signal to the specified WOT voltage. There's not really anything wrong with the setup you're thinking of as long as you tune it. As the intake gets into the positive pressure range I believe the airflow offset (reported versus actual) will decrease. I never ran a MAF on a turboed setup, on the N/A the offset was bad across the entire range, but predictably so, so I got away with trimming most of it out with one adjustment to the mainscale. Isn't the stock piping 2"? __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

03-24-2010, 04:52 AM	#3
cvbikeguy 3" Exhaust Join Date: Nov 2009 Location: Castro Valley, CA Posts: 248	ROFL! Man, I was just screwing with you... yeah... there is an odd pattern of me ending threads by replying to them. I hope it's because I've satisfactorily answered the questions, but sometimes I wonder if it's just because everyone else is fed up. lol hey cre did you notice a difference putting the maf on your n/a? __________________ 86 MKIII Supra East Bay, CA 7mge rebuild. http://www.toyota-supra.info/forums/...-tomorrow.html MKIII commercial http://www.youtube.com/watch?v=HY9W3...om=PL&index=27 lightening build http://www.toyota-supra.info/forums/...ing-build.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about 7m-gte.	AzNbOi2626	MKIII Supra	3	03-29-2011 06:55 PM
Starter Removal question	OkieRA29	MKIII Supra	13	05-11-2010 12:08 AM
oil leak question	ftwmotorsports	MKIII Supra	9	02-12-2010 03:53 PM
Help! Question on front NOSE and bumper supports.	lifesnotfair	MKIII Supra	1	12-26-2005 03:54 PM
Quick question	AutoXMan	MKIII Supra	12	09-30-2005 06:40 AM