I just got a supra turbo i need help please!!!

btwilson86 · 01-18-2010, 07:24 AM

Quote:

Originally Posted by bradenman1

ohh and note to all oreily autoparts sucks dick! they told me all the parts i needed were dealer spacific( plug wires, and vacume line tube with a valve on it)

Sounds like that store/parts guy in particular sucks, because the O'Reilly's I work at here in MT has 3 different sets of plug wires and plenty of vacuum lines/one way valves in stock... In any case, it unfortunately all depends on who you talk to.

Probably your best repair manual on line is the TSRM. Factory repair manual for a 90, but almost all of it applies to all MKIII Supra's.

bradenman1 · 01-20-2010, 03:35 PM

Ok I'm having a hard time finding replacement parts for my supra. I need the oil lines for the turbo and I still can't find oem innercooler hoses...

916MKIIIx2 · 01-20-2010, 06:24 PM

For both of the lines you're looking for you can order online at most places that sell hose, cut to fit... or you can buy a ceap aluminum IC pipe set from EBAY for about 80 bucks. Look and you shall recieve

bradenman1 · 01-20-2010, 08:20 PM

Quote:

Originally Posted by 916MKIIIx2

For both of the lines you're looking for you can order online at most places that sell hose, cut to fit... or you can buy a ceap aluminum IC pipe set from EBAY for about 80 bucks. Look and you shall recieve

Iv seen ic piping kits but didn't know if they would be a direct fit from ebay. And. Have looked on plenty of sites for the oil return line or pipe what ever you want to call it ( the oone the one that connects to the turbo and has 2 pieces that goes to the oil pan and engine block) and I have yet to see it any where. I would just re use it but there's a hole in it

PHP Code:


			
[PHP]

[/PHP]

btwilson86 · 01-20-2010, 08:39 PM

About all the kits you find on ebay are gonna be somewhat universal... Did a quick search and found these oil line kits for the feed and return. Can't vouch for the quality as I still have my stock ones on there.

cre · 01-20-2010, 08:52 PM

I prefer name brand hose and fittings. Places like SupraSport and HorsePowerFreaks sell line kits as well; But I trust that I'm going to get better quality and reliable parts.

For the IC hoses you can just replace the old ones with hoses from SiliconeIntakes.com. Excellent prices.

The E-Bay "universal" IC piping kit sold as "CX Racing" (I can't remember the vendor's name) is nice quality. The kit was labeled as being for our year Supras... it takes a little work to get it all in properly and one or two cuts. I had to order a couple extra couplers which I ordered from SiliconeIntakes though. SI also sells vacuum tubing but I don't think they sell a kit for our cars... it's worth it to replace old vacuum hoses.

bradenman1 · 01-21-2010, 04:06 PM

Quote:

Originally Posted by cre

I prefer name brand hose and fittings. Places like SupraSport and HorsePowerFreaks sell line kits as well; But I trust that I'm going to get better quality and reliable parts.

For the IC hoses you can just replace the old ones with hoses from SiliconeIntakes.com. Excellent prices.

The E-Bay "universal" IC piping kit sold as "CX Racing" (I can't remember the vendor's name) is nice quality. The kit was labeled as being for our year Supras... it takes a little work to get it all in properly and one or two cuts. I had to order a couple extra couplers which I ordered from SiliconeIntakes though. SI also sells vacuum tubing but I don't think they sell a kit for our cars... it's worth it to replace old vacuum hoses.

Yeah I looked at the ebay hoses they won't work without a lot of modification I was really looking for new stock oil lines but I got a friend at power fab ordering it for me.

That silicone intake place looks pretty good I think I'm just going to order the tube I need for now then convert to hard pipes once I get some money saved up again.

And yes there are many vacume lines being replaced atleast 10 or so. Some were kremped and others were riped open during removal due to bwing dryrotted.

Ohh and it turns out I'm getting a new ct26 for around 650 my other turbo was shot the inside of the housing and alll the berings were pretty bad

Thanks for all the feedback guys you have saved me so much time with all this help

01-20-2010, 08:39 PM	#5
btwilson86 Super Moderator Join Date: May 2007 Location: Billings, Montana Posts: 1,034	About all the kits you find on ebay are gonna be somewhat universal... Did a quick search and found these oil line kits for the feed and return. Can't vouch for the quality as I still have my stock ones on there. __________________ 1989 7MGTE R154 Targa Top White Package w/Blue Interior Driftmotion 57trim CT26, Upgraded Intercooler, 2.25" Hard Pipes, 3" Turbo Back Exhaust with Test Pipe, HKS VPC w/GM 3 bar MAP sensor, APEXi S-AFC, Walbro 255lph fuel pump, ProSport EVO Series Boost / Fuel Pressure / AFR gauges, Lotek a Pillar Gauge Pod, HKS Type 0 Turbo Timer, Eibach Lowering Springs, Tokico Illumina II TEMS struts, custom powder coated Motegi Racing TrakLite wheels

01-20-2010, 08:52 PM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I prefer name brand hose and fittings. Places like SupraSport and HorsePowerFreaks sell line kits as well; But I trust that I'm going to get better quality and reliable parts. For the IC hoses you can just replace the old ones with hoses from SiliconeIntakes.com. Excellent prices. The E-Bay "universal" IC piping kit sold as "CX Racing" (I can't remember the vendor's name) is nice quality. The kit was labeled as being for our year Supras... it takes a little work to get it all in properly and one or two cuts. I had to order a couple extra couplers which I ordered from SiliconeIntakes though. SI also sells vacuum tubing but I don't think they sell a kit for our cars... it's worth it to replace old vacuum hoses. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Information about non turbo Supra	Jimbo_2JZ	Non-Generation Specific Questions	3	02-20-2009 10:13 PM
1988 Toyota Supra Turbo runs very rich need help	PhillyKorean	Non-Generation Specific Questions	0	10-25-2008 03:28 PM
HorsepowerFreaks Turbo M3 vs Single Turbo Supra	ChrisB	Non-Generation Specific Questions	0	01-01-2007 04:56 PM

01-20-2010, 03:35 PM	#2
bradenman1 3" Exhaust Join Date: Jan 2010 Location: texas Posts: 105	Ok I'm having a hard time finding replacement parts for my supra. I need the oil lines for the turbo and I still can't find oem innercooler hoses...

01-20-2010, 06:24 PM	#3
916MKIIIx2 3" Exhaust Join Date: Nov 2008 Location: California Posts: 152	For both of the lines you're looking for you can order online at most places that sell hose, cut to fit... or you can buy a ceap aluminum IC pipe set from EBAY for about 80 bucks. Look and you shall recieve