01-09-2010, 01:47 AM
|
#3 |
|
12psi boost
Join Date: Dec 2007
Location: Atlanta
Posts: 300
 |
Simple. Find the neutral safety switch, cut the wires at the connector, and splice together, completing the circuit.
The neutral safety switch was on the passenger side of the transmission with a three wire connector. The two prongs that are parallel to each other are the connectors for the safety switch. One wire should be black with a blue stripe, and the other black with a white stripe. Cut these two wires and splice them together. This from the TSRM. There used to be a sticky for it. |
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| swap 2jz-gte into sc300 | royaldrift29 | Non-Generation Specific Questions | 1 | 05-04-2010 01:41 PM |
| Rebuild time | EthanMKIII | MKIII Supra | 8 | 11-14-2008 02:23 AM |
| To rebuild or not to rebuild that is the question | 88supraturbo5speed | Non-Generation Specific Questions | 6 | 04-21-2008 04:05 PM |
| Swap or Rebuild? | kirkajr | Non-Generation Specific Questions | 2 | 12-18-2004 08:41 PM |
Threaded Mode