checking out an 86 mk3 tomorrow - Toyota Supra Forums

Home / Toyota Supra Forums

		Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra
checking out an 86 mk3 tomorrow

cvbikeguy 7mge buy and rebuild. Cracked... 11-21-2009, 01:25 AM

cre The W58 is the N/A's 5 speed.... 11-21-2009, 01:43 AM

cvbikeguy I'm planning on getting the... 11-21-2009, 02:13 AM

cvbikeguy Thanks for the advice. Ill... 11-21-2009, 02:24 AM

Krem if you have a little paycheck... 11-21-2009, 03:01 AM

cvbikeguy Yea I was looking for a while... 11-21-2009, 03:11 AM

cre The 6 speed won't fit. 11-21-2009, 08:47 AM

cvbikeguy I've seen an mkIII with a v160 11-21-2009, 08:54 AM

cre I should have just said that... 11-21-2009, 09:34 AM

cvbikeguy I have an new mkiii 11-22-2009, 12:29 AM

cvbikeguy haha problems already. 11-23-2009, 01:27 AM

cvbikeguy just finished tonight. havnt... 11-23-2009, 04:13 AM

Krem hmmm, loss of pressure,... 11-23-2009, 06:26 PM

cvbikeguy what was the problem with... 11-23-2009, 06:30 PM

cre Pull the timing belt and look... 11-23-2009, 06:28 PM

james123 i got the car today.... 11-24-2009, 11:21 AM

cvbikeguy stalker......... :gtfo: 11-25-2009, 01:19 AM

cvbikeguy ok so just an update. i... 11-25-2009, 01:23 AM

Krem That's what I was getting... 11-25-2009, 01:55 AM

cvbikeguy yea totally agreed. do you... 11-25-2009, 02:05 AM

cvbikeguy hey krem what do you think? ... 11-25-2009, 03:47 AM

cvbikeguy Where in the engine should I... 01-07-2010, 06:44 PM

cvbikeguy im still alive..... car... 01-12-2010, 02:00 AM

cre The coolant channel passes... 01-12-2010, 02:16 AM

PaperClip

oregonjoe Water Through Intake Runner 01-12-2010, 03:34 AM

cvbikeguy "You don't need to rtv that"... 01-12-2010, 03:38 AM

cre Excellent! Thanks for the... 01-12-2010, 03:40 AM

cvbikeguy ahouls i be worried about the... 01-13-2010, 02:22 AM

cre Well, as long as it isn't... 01-13-2010, 02:37 AM

cvbikeguy Hanging out with the plugs in... 01-13-2010, 02:49 AM

cre Make sure the plug galley... 01-13-2010, 02:50 AM

cvbikeguy lol. i only got one of the... 01-13-2010, 03:55 AM

oregonjoe Coolant 01-13-2010, 04:45 PM

cvbikeguy sweeet :) ok i fixed it.... 01-14-2010, 02:45 AM

cvbikeguy crossing fingers 01-14-2010, 11:56 PM

oregonjoe Start up 01-15-2010, 12:45 AM

cvbikeguy So attempt no. 4 has failed.... 01-15-2010, 09:49 AM

oregonjoe leak 01-15-2010, 04:35 PM

cvbikeguy sorry i couldnt find a... 01-16-2010, 04:39 PM

cvbikeguy not quiting yet.... on the... 01-18-2010, 02:26 AM

cvbikeguy just as an update to what i... 01-18-2010, 02:41 AM

cre Just crack the old grommets... 01-18-2010, 03:55 AM

cvbikeguy the car hates me. so simple :) 01-18-2010, 04:03 AM

cvbikeguy hehe it worked. cool cool. we... 01-18-2010, 04:21 AM

cvbikeguy oops! thanks cre. saved my... 01-19-2010, 03:01 AM

oregonjoe Leak? 01-19-2010, 03:17 AM

cvbikeguy well the nipple is fine and... 01-19-2010, 03:22 AM

cvbikeguy lol some guy from up the... 01-19-2010, 05:16 AM

cvbikeguy liquids in....... no leak... 01-19-2010, 06:08 AM

cvbikeguy this is getting redicilous 01-19-2010, 11:24 PM

cvbikeguy so i notice the nut on the... 01-20-2010, 12:26 AM

cre Well, first off, copper... 01-20-2010, 01:40 AM

cvbikeguy yea the copper washers are... 01-20-2010, 02:21 AM

cre I know where you meant... is... 01-20-2010, 02:49 AM

cvbikeguy so your saying the leak has... 01-20-2010, 02:58 AM

Porsche_911 CVbikeguy, been watching your... 01-20-2010, 07:15 PM

cvbikeguy wow thanks man. yea im pretty... 01-21-2010, 05:26 AM

cre Heh, for a while there I was... 01-21-2010, 06:24 AM

cvbikeguy hahaha nice. so tomorrow... 01-21-2010, 06:33 AM

cre Think about it, an even... 01-21-2010, 07:01 AM

gteduck rebuild 7mge 01-21-2010, 07:44 PM

cvbikeguy garr a leak so smallll. so... 01-22-2010, 02:20 AM

cvbikeguy did i mention the car sounds... 01-22-2010, 02:22 AM

cvbikeguy lol thanks so much. oh man... 01-22-2010, 03:48 AM

cvbikeguy ok so we tried again tonight.... 01-22-2010, 04:03 AM

cvbikeguy trying to research ... 01-22-2010, 04:33 AM

btwilson86 I think it means to loosen it... 01-22-2010, 06:14 AM

cre Wow.... umm.... yeah. I'm... 01-22-2010, 06:34 AM

cre You know, it may be... 01-22-2010, 06:35 AM

oregonjoe New News? 01-26-2010, 01:29 AM

cre There's no copper washer for... 01-26-2010, 02:06 AM

cvbikeguy new fpr 01-27-2010, 04:55 PM

cvbikeguy car is running 01-27-2010, 05:44 PM

cvbikeguy video 01-27-2010, 06:12 PM

btwilson86 Glad it's running, just a... 01-27-2010, 06:31 PM

cvbikeguy it was getting low on oil. i... 01-27-2010, 07:50 PM

cre You may replace the screws... 01-27-2010, 08:45 PM

cvbikeguy No rtv... What have I... 01-27-2010, 10:47 PM

cvbikeguy No rtv... What problems am... 01-27-2010, 11:19 PM

cvbikeguy Cre? Anyone? 01-29-2010, 06:25 AM

cre Well, did you over torque the... 01-29-2010, 07:53 AM

cre I've been through the timing... 01-29-2010, 08:34 AM

cvbikeguy sooo i have been following... 01-30-2010, 04:40 PM

cre The RTV does go on top of... 01-30-2010, 06:40 PM

cvbikeguy heyyy sorry for not having an... 02-06-2010, 01:15 PM

cre Yes, pull the head to seal... 02-06-2010, 07:39 PM

cvbikeguy heyyy sorry im back from... 02-19-2010, 09:40 PM

cre I linked to the TSRM pages... 02-20-2010, 04:40 AM

cvbikeguy man that sucks. i should have... 02-21-2010, 02:27 PM

cvbikeguy what the....? 02-24-2010, 01:55 AM

cre If you mean he's suggesting... 02-24-2010, 03:42 AM

cvbikeguy Hmmm what do you mean? I... 02-24-2010, 05:27 AM

cre The ECU requires an oil... 02-24-2010, 05:50 AM

cvbikeguy yea i was trying to find a... 02-25-2010, 04:13 PM

cre Any mechanical oil pressure... 02-25-2010, 07:00 PM

cvbikeguy oh sweet so yea ill just... 02-25-2010, 07:32 PM

cre Krem, your issue sounds like... 02-25-2010, 07:44 PM

cvbikeguy haha so as im thinking that... 02-25-2010, 07:58 PM

cvbikeguy hey cre, im just getting near... 03-01-2010, 10:04 PM

Krem when I start my car, cold,... 02-25-2010, 07:18 PM

cvbikeguy or maybe its the transmission? 03-01-2010, 10:06 PM

cre Pull the spark plugs. ;) 03-02-2010, 02:56 AM

cvbikeguy Haha...hahaha....hahahaha........ 03-02-2010, 03:43 AM

cre You've telling me... I'm... 03-02-2010, 04:21 AM

cvbikeguy hahaha my girl says we need... 03-03-2010, 12:07 AM

cvbikeguy soooooooooooooooooo in case... 03-19-2010, 02:19 AM

Krem Grats CV... now you and your... 03-19-2010, 05:19 AM

cvbikeguy lol cre is going to vegas? 03-19-2010, 05:33 AM

btwilson86 Shoot, I'm down for Vegas...... 03-19-2010, 07:11 AM

cvbikeguy haha thanks so much. now i... 03-19-2010, 07:36 AM

cvbikeguy Thanks 03-25-2010, 05:01 AM

cre Me, I'm wasteful after big... 01-15-2010, 12:52 AM

cvbikeguy http://www.supramania.com/foru... 11-23-2009, 06:34 PM

cvbikeguy after thoughts. 11-23-2009, 06:50 PM

Krem Good luck CV... I think... 11-23-2009, 09:18 PM

cvbikeguy oh man i feel your pain. yea... 11-23-2009, 09:43 PM

Krem bolt ons is something I've... 11-23-2009, 10:24 PM

cvbikeguy Yea I'm think after this head... 11-24-2009, 01:57 AM

cre Sweet! Somehow he managed to... 11-23-2009, 11:27 PM

cvbikeguy sorry that took so long. his... 11-25-2009, 04:04 AM

Krem I don't think I'd go thru the... 11-25-2009, 04:10 PM

cvbikeguy ohhhh man well due to time... 11-25-2009, 05:48 PM

Krem I wish you best of luck cause... 11-25-2009, 06:32 PM

cvbikeguy oh man so i remember... 11-25-2009, 07:18 PM

cre Unless there's a problem with... 11-25-2009, 07:32 PM

cvbikeguy [QUOTE=cre;75286]Unless... 11-25-2009, 07:38 PM

cre Oh, that's right! I forgot... 11-25-2009, 07:45 PM

cvbikeguy ok so the exhaust manifold is... 11-25-2009, 11:39 PM

cvbikeguy ok bad news. im trying to get... 11-26-2009, 12:43 AM

cvbikeguy ok i feel like i... 11-26-2009, 02:29 AM

cre When you remove the head... 11-26-2009, 02:46 AM

cvbikeguy haha im glad you didnt... 11-26-2009, 02:59 AM

cre Ah, well that is good. I... 11-26-2009, 03:56 AM

cvbikeguy theres an order? 11-26-2009, 04:55 AM

cre Yes, there's an order (for... 11-26-2009, 05:28 AM

cvbikeguy blown head gasket? 11-28-2009, 05:53 PM

cvbikeguy piston 2&3 are cracked 11-28-2009, 07:28 PM

cre Cracked piston... or pistonS... 11-28-2009, 08:10 PM

cvbikeguy pistons, 2 and 3. here are... 11-29-2009, 12:52 AM

cre Yeah, that need to go to the... 11-29-2009, 01:01 AM

cvbikeguy haha thanks cre. 11-29-2009, 01:15 AM

MA70-3.0GT OUCH, melted pistons too.... 11-29-2009, 04:56 PM

cvbikeguy yea strangly there was no... 11-30-2009, 06:37 PM

cre Good god.... if that sad... 12-01-2009, 07:45 AM

cvbikeguy Hahaha yea I might as well. I... 12-01-2009, 07:49 AM

cre And you're doing all the... 12-01-2009, 07:53 AM

cvbikeguy Yes I'm doing everything... 12-01-2009, 08:01 AM

cvbikeguy hey just wondering, which... 12-01-2009, 04:37 PM

cvbikeguy not blown... 12-02-2009, 03:00 AM

cvbikeguy ***tip*** so i know almost... 12-02-2009, 03:16 AM

cvbikeguy timing... 12-02-2009, 05:24 AM

cre Well, you could get custom... 12-02-2009, 08:07 PM

cvbikeguy oh man... so we got to the... 12-03-2009, 03:43 PM

cvbikeguy ahhh cre you have convinced... 12-03-2009, 05:16 PM

cre Careful... you have to have a... 12-03-2009, 11:37 PM

cvbikeguy *researching* yea i see they... 12-04-2009, 12:34 AM

cvbikeguy as im finishing your reply i... 12-04-2009, 12:43 AM

cre I very strongly recommend you... 12-04-2009, 02:35 AM

cvbikeguy haha yea ive been reading... 12-04-2009, 02:41 AM

cre Okay, then I would talk to... 12-04-2009, 03:07 AM

cvbikeguy *sigh* your totally right.... 12-04-2009, 04:56 AM

MA70-3.0GT Tell you what then, seeing as... 12-04-2009, 05:40 PM

cre If going turbo, I would... 12-04-2009, 07:57 PM

cvbikeguy paint 12-10-2009, 02:58 PM

Krem This is what I'm kinda... 12-10-2009, 06:15 PM

cvbikeguy more paint 12-11-2009, 10:21 PM

cre You've got that feeling too... 12-11-2009, 11:01 PM

cvbikeguy hahaha man i should have read... 12-11-2009, 11:19 PM

cvbikeguy block is here. still waiting... 12-16-2009, 12:48 AM

cvbikeguy movin along 12-16-2009, 08:27 PM

cvbikeguy delivery 12-17-2009, 05:11 AM

cvbikeguy just spend a couple hours... 12-23-2009, 01:27 AM

cvbikeguy just dont tell me im f*cked 12-28-2009, 08:56 AM

cvbikeguy where does it go? 12-28-2009, 10:00 AM

cvbikeguy sorry, im falling asleep here... 12-28-2009, 11:45 AM

cre Transmission supports: ... 12-28-2009, 07:06 PM

cre OMG!!!! I can't believe I... 12-28-2009, 07:07 PM

cvbikeguy ................................. 12-28-2009, 07:10 PM

cvbikeguy i cant find anyone that has... 12-28-2009, 07:18 PM

cre What kind of time frame are... 12-28-2009, 09:03 PM

cvbikeguy haha 12-28-2009, 09:18 PM

cvbikeguy almost there ... 12-30-2009, 05:39 AM

cre Wow, your woman's pretty... 12-30-2009, 06:03 AM

cvbikeguy she never lets me do... 12-30-2009, 06:07 AM

cvbikeguy so when i was taking the car... 12-30-2009, 06:17 AM

cre 13ft.lbs. I suppose... 12-30-2009, 06:47 AM

cvbikeguy ooops i thought i posted the... 12-30-2009, 06:53 AM

cre Yeah, that's the cap I spoke... 12-30-2009, 07:15 AM

cvbikeguy sweet. so turns out my friend... 12-30-2009, 07:31 AM

cre Which plugs are you planning... 12-30-2009, 07:50 AM

cvbikeguy yup. the hex is too big on... 12-30-2009, 07:53 AM

cre BCPR5EGP are the factory plug... 12-30-2009, 08:10 AM

cvbikeguy cre if you ever come to cali... 12-30-2009, 05:16 PM

cre Nah, I don't know enough to... 12-30-2009, 07:13 PM

cvbikeguy lol if only i had it man. ... 12-31-2009, 03:48 AM

cre The circular ones are... 12-31-2009, 05:56 AM

cre Your injectors aren't... 12-31-2009, 06:02 AM

cvbikeguy grrrr. lol thanks cre ill go... 12-31-2009, 08:43 PM

cre The two red wires are not... 12-31-2009, 09:30 PM

cvbikeguy not stock? *snip* mmk. so... 12-31-2009, 09:44 PM

cvbikeguy im an idiot 01-01-2010, 10:53 PM

cre The hose comes from the... 01-01-2010, 11:04 PM

cvbikeguy ................ thats... 01-01-2010, 11:08 PM

cvbikeguy is this the same hose? cause... 01-01-2010, 11:19 PM

cvbikeguy oh wait they are different... 01-01-2010, 11:22 PM

cre Here's how it runs: #16267... 01-01-2010, 11:29 PM

cvbikeguy lol sorry for posting a... 01-01-2010, 11:32 PM

cvbikeguy crap i cant find the nipple... 01-02-2010, 02:33 AM

cre It's on the flange of the... 01-02-2010, 03:16 AM

cvbikeguy car speaks to me in my sleep 01-02-2010, 08:30 AM

cre Thought I was f*&^ing with... 01-02-2010, 09:09 AM

cvbikeguy chase the bolts in the block... 01-02-2010, 09:13 AM

cvbikeguy ok so im about to go to... 01-02-2010, 04:18 PM

cvbikeguy tried to start the car. turns... 01-02-2010, 07:18 PM

oregonjoe Startup tips 01-02-2010, 07:42 PM

cvbikeguy I know I should know this... 01-02-2010, 07:55 PM

cvbikeguy found a stray wire ... 01-02-2010, 08:02 PM

oregonjoe Fuel Pump Fuse 01-02-2010, 08:12 PM

cvbikeguy Its black with two slots.... 01-02-2010, 08:17 PM

oregonjoe Cruise Control 01-02-2010, 08:37 PM

cvbikeguy no doesnt look like a T. just... 01-02-2010, 08:46 PM

cvbikeguy do you think i need to adjust... 01-02-2010, 08:51 PM

oregonjoe Timing is critical 01-02-2010, 09:20 PM

oregonjoe Timming 01-02-2010, 09:26 PM

cvbikeguy holy sh*t. ok im sure this is... 01-02-2010, 09:29 PM

cvbikeguy last time i listen to a guy... 01-02-2010, 09:32 PM

cre Dumbass. :D 01-02-2010, 09:34 PM

cre As long as it's all zero'd... 01-02-2010, 09:33 PM

cvbikeguy so all i need to do is set... 01-02-2010, 09:41 PM

oregonjoe Timming 01-02-2010, 09:58 PM

cvbikeguy thanks everyone. well sadly i... 01-02-2010, 10:01 PM

cre I redo it until the bolt goes... 01-02-2010, 10:08 PM

cre Did you read my extended post... 01-03-2010, 04:48 AM

cvbikeguy Got head arp bolts. So I... 01-03-2010, 05:30 AM

cre When you torqued down the... 01-03-2010, 07:30 AM

cre Bah.... the alternator... not... 01-03-2010, 07:31 AM

cvbikeguy no sorry thats a typo i meant... 01-03-2010, 07:35 AM

cvbikeguy bolts moved smoothly all the... 01-03-2010, 07:37 AM

cvbikeguy *turn key* rev rev rev... 01-03-2010, 08:46 AM

cre Okay... I'm just the paranoid... 01-03-2010, 12:35 PM

cvbikeguy i dunno cre. im kinda scared... 01-03-2010, 01:49 PM

cvbikeguy ok so my friend says that the... 01-03-2010, 07:07 PM

cvbikeguy car started. lot of smoke... 01-03-2010, 09:07 PM

cvbikeguy no oil pressure 01-03-2010, 09:12 PM

cre The pump is mechanical,... 01-03-2010, 09:22 PM

cvbikeguy pully? oops 01-03-2010, 09:38 PM

cvbikeguy Is smoke normal when you... 01-03-2010, 09:56 PM

cre Heh, depends where....... 01-03-2010, 10:13 PM

cvbikeguy the smoke is starting to get... 01-04-2010, 12:13 AM

cvbikeguy any other reason why there... 01-04-2010, 12:44 AM

cre When you say "smoke around... 01-04-2010, 12:50 AM

oregonjoe Pressure 01-04-2010, 02:03 AM

cvbikeguy Just started it up again.... 01-04-2010, 02:11 AM

oregonjoe Oil smoke 01-04-2010, 02:17 AM

oregonjoe Timming? 01-04-2010, 02:25 AM

cre EDIT: I am sorry... I re-read... 01-04-2010, 02:59 AM

cvbikeguy hahaha yup yup rebuild.... 01-07-2010, 08:51 AM

oregonjoe Oil PSI 01-03-2010, 11:11 PM

oregonjoe Smoke 01-03-2010, 11:18 PM

cvbikeguy yea it smokes at the exhaust... 01-03-2010, 11:46 PM

cre What I was referring to when... 01-03-2010, 09:18 PM

cvbikeguy any advice on the oil... 01-03-2010, 09:22 PM

cvbikeguy does it matter how the cap is... 01-03-2010, 07:11 PM

cvbikeguy ok so i start work tomorrow.... 01-03-2010, 07:42 PM

oregonjoe Dist alignment 01-03-2010, 07:53 PM

cvbikeguy so i line up the long arrow... 01-03-2010, 08:01 PM

oregonjoe Timing 01-03-2010, 08:27 PM

cvbikeguy you love my pics... 01-03-2010, 07:54 PM

cvbikeguy put a light on your crank?... 01-02-2010, 09:27 PM

cre Ummm... NO. Has to be at 0*... 01-02-2010, 09:28 PM

cre Chasing head bolt threads....... 01-02-2010, 09:24 PM

cre The extra plug, not very... 01-02-2010, 09:26 PM

oregonjoe Plugs - 01-02-2010, 08:21 PM

Prev

Previous Post

Next Post

Next

Old

12-01-2009, 08:01 AM

#11

cvbikeguy

3" Exhaust

Join Date: Nov 2009

Location: Castro Valley, CA

Posts: 248

cvbikeguy is on a distinguished road

Default

Quote:

Originally Posted by cre

View Post

And you're doing all the assembly and disassembly I presume? If you're going to a metal head gasket find out what the finest RA they can produce is. Also make sure they machine the block WITH the rear timing belt plate in place!

Yes I'm doing everything myself. I shouldn't have to go to a MHG unless I'm hoping to get 600+ HP out of this right? Am I fine just getting the factory? And yes I will definatly have the plate on if the machine it. Already read Ihatehacks rebuild thread

and did you see my link on that rebuild kit on ebay? Looks good right? Thanks for your input cre. Your a lifesaver

cvbikeguy is offline

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lower Ball Joints - Checking here first	Grandavi	MKIII Supra	3	09-20-2008 04:04 AM
Picking up my 89 tomorrow	8uwav6	Show n Tell	2	03-31-2008 08:08 PM
Checking Thermostat	scruffboy	Non-Generation Specific Questions	6	03-09-2006 05:49 PM
Supra Noob checking in from Florida	PalmCoastMk3	Non-Generation Specific Questions	1	12-23-2005 05:08 PM
Supra Newb Just checking in	Razor	Non-Generation Specific Questions	1	12-21-2005 04:15 AM

All times are GMT. The time now is 06:23 AM.

1986

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87