what do i need to run low 12's in mk3?

worm611 · 12-16-2010, 12:27 AM

Here is basically what my car has done, I never ran it at the track, actually I have not even recieved the car from the shipping service yet, which is pissing me off, BUT the previous owner ran a 12.0 @ 116mph @ 18psi, pump gas and street tires.

Stock block .040 over, JE forged pistons, Lightweight wrist pins, ARP rod bolts, Ported and polished head, -GReddy GREX head gasket, ARP head bolts, Exhaust timing retarded 2 degrees, Port-matched, polished intake manifold, TRUST GReddy Rebic LC computer, Bored out CT26 turbo W/oversized compressor, HKS manual boost controller, Spearco intercooler, GReddy blow-off valve, Polished exhaust manifold to remove slag, 3.5" ceramic-wrapped downpipe, 3.5" custom exhaust, Centerforce dual-friction clutch.

Suspension is not setup soft either.

12-16-2010, 12:27 AM	#15
worm611 Stock Join Date: Nov 2010 Location: Ephrata Posts: 13	Here is basically what my car has done, I never ran it at the track, actually I have not even recieved the car from the shipping service yet, which is pissing me off, BUT the previous owner ran a 12.0 @ 116mph @ 18psi, pump gas and street tires. Stock block .040 over, JE forged pistons, Lightweight wrist pins, ARP rod bolts, Ported and polished head, -GReddy GREX head gasket, ARP head bolts, Exhaust timing retarded 2 degrees, Port-matched, polished intake manifold, TRUST GReddy Rebic LC computer, Bored out CT26 turbo W/oversized compressor, HKS manual boost controller, Spearco intercooler, GReddy blow-off valve, Polished exhaust manifold to remove slag, 3.5" ceramic-wrapped downpipe, 3.5" custom exhaust, Centerforce dual-friction clutch. Suspension is not setup soft either.