what do i need to run low 12's in mk3? - Page 2

jdmmilhouse · 11-13-2009, 07:19 AM

i found a 1j fresh rebuild, missing turbos and tranny for only 900 bucks on chicago craigslist. im thinking about getting it.

cre · 11-16-2009, 04:59 AM

I'd talk to kwnate about the JZ's. He's got some very nice MKIII's with them.

Supraspd · 12-15-2010, 02:52 AM

hey evosupra could you send me some links to make my mk3 faster? my email is Theabold77@yahoocom. Thanks

907mge · 12-15-2010, 03:01 AM

I don't think he is around anymore.

worm611 · 12-16-2010, 12:27 AM

Here is basically what my car has done, I never ran it at the track, actually I have not even recieved the car from the shipping service yet, which is pissing me off, BUT the previous owner ran a 12.0 @ 116mph @ 18psi, pump gas and street tires.

Stock block .040 over, JE forged pistons, Lightweight wrist pins, ARP rod bolts, Ported and polished head, -GReddy GREX head gasket, ARP head bolts, Exhaust timing retarded 2 degrees, Port-matched, polished intake manifold, TRUST GReddy Rebic LC computer, Bored out CT26 turbo W/oversized compressor, HKS manual boost controller, Spearco intercooler, GReddy blow-off valve, Polished exhaust manifold to remove slag, 3.5" ceramic-wrapped downpipe, 3.5" custom exhaust, Centerforce dual-friction clutch.

Suspension is not setup soft either.

mkiiisupra · 12-16-2010, 01:35 AM

http://www.supraforums.com/forum/sho...d.php?t=152334

Will at least give you a baseline idea.

Supra Saiyan · 12-19-2010, 07:22 AM

Quote:

Originally Posted by CanadianBak'inSupra

it depends...
what do u want for hp??
are you ready for hp?
there is no doubt about it the 1jz and 2jz TT both have more power and capability
i myself am going to be putting money into a 7mge N/A and going for a 300-400 HP mark, and i dont want to exceed...
make sure you are able to handle the power before u do, because i have fucked up drifts even with my stock supra 200hp
things can get sticky fast when your going fast

....Wow, well.. No.. You going to put a second engine in the back to get this HP right? Lol, BOOOOM!!!

CanadianBak'inSupra · 12-19-2010, 01:49 PM

if you think 400 is un achieve able with a 7mge n/a, your sadly mistaken.
and thats all that needs to be said...

not only do i not have that engine anymore, im building my 5mge.
when im done we will see who is laughing.

Supra Saiyan · 12-19-2010, 01:57 PM

Quote:

Originally Posted by CanadianBak'inSupra

if you think 400 is un achieve able with a 7mge n/a, your sadly mistaken.
and thats all that needs to be said...

not only do i not have that engine anymore, im building my 5mge.
when im done we will see who is laughing.

Ok look anything is possible but it's going to be a ton of money to get that power.. You could get that for less with the turbo engine..

Green7mgte · 12-19-2010, 08:29 PM

Quote:

Originally Posted by CanadianBak'inSupra

if you think 400 is un achieve able with a 7mge n/a, your sadly mistaken.

did someone hack your forum user name?

12-15-2010, 02:52 AM	#13
Supraspd Stock Join Date: Dec 2010 Location: AZ Posts: 1	Evosupra hey evosupra could you send me some links to make my mk3 faster? my email is Theabold77@yahoocom. Thanks

12-16-2010, 01:35 AM	#16
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	http://www.supraforums.com/forum/sho...d.php?t=152334 Will at least give you a baseline idea. __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

12-19-2010, 01:49 PM	#18
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	if you think 400 is un achieve able with a 7mge n/a, your sadly mistaken. and thats all that needs to be said... not only do i not have that engine anymore, im building my 5mge. when im done we will see who is laughing. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

11-13-2009, 07:19 AM	#11
jdmmilhouse Stock Join Date: Nov 2009 Location: chicago Posts: 28	i found a 1j fresh rebuild, missing turbos and tranny for only 900 bucks on chicago craigslist. im thinking about getting it.

11-16-2009, 04:59 AM	#12
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I'd talk to kwnate about the JZ's. He's got some very nice MKIII's with them.

12-15-2010, 03:01 AM	#14
907mge 20psi boost Join Date: Dec 2009 Location: Harrisburg Posts: 759	I don't think he is around anymore.

12-16-2010, 12:27 AM	#15
worm611 Stock Join Date: Nov 2010 Location: Ephrata Posts: 13	Here is basically what my car has done, I never ran it at the track, actually I have not even recieved the car from the shipping service yet, which is pissing me off, BUT the previous owner ran a 12.0 @ 116mph @ 18psi, pump gas and street tires. Stock block .040 over, JE forged pistons, Lightweight wrist pins, ARP rod bolts, Ported and polished head, -GReddy GREX head gasket, ARP head bolts, Exhaust timing retarded 2 degrees, Port-matched, polished intake manifold, TRUST GReddy Rebic LC computer, Bored out CT26 turbo W/oversized compressor, HKS manual boost controller, Spearco intercooler, GReddy blow-off valve, Polished exhaust manifold to remove slag, 3.5" ceramic-wrapped downpipe, 3.5" custom exhaust, Centerforce dual-friction clutch. Suspension is not setup soft either.