Mystery Wire?

[Cyto]

I still can't find a plug hole lol

[cre]

It connects to the factory alarm's horn which is mounted to the firewall next to the brake booster. I can't see enough in your picture to see where it mounts, but if you're not seeing the other end I presume the horn has been removed entirely.


http://www.cygnusx1.net/Supra/Librar...spx?F=8611&P=1

[Krem]

Originally Posted by cre

It connects to the factory alarm's horn which is mounted to the firewall next to the brake booster. I can't see enough in your picture to see where it mounts, but if you're not seeing the other end I presume the horn has been removed entirely.


http://www.cygnusx1.net/Supra/Librar...spx?F=8611&P=1

Heh, no wonder it looks like a horn... but wait... there's a factory alarm on the car? how come mine never goes off... nor do I have a remote to arm it...

[cre]

Originally Posted by Krem

Heh, no wonder it looks like a horn... but wait... there's a factory alarm on the car? how come mine never goes off... nor do I have a remote to arm it...

It didn't come with a remote... not a keyless system. It comes on automatically after the last door is closed when the doors are locked. There is a sensor in each of the three lock cylinders to arm and disarm it. in '91 and '92 the system was built a little differently and a keyless module was offered by Toyota which just plugged right in.


If you don't see the light on the dash labeled "Security" light up then the alarm is not arming... this is due to one of three things usually: bad lock sensor, bad trigger sensor (doors, hood and hatch) or it's been disabled on purpose.

[Krem]

Originally Posted by cre

If you don't see the light on the dash labeled "Security" light up then the alarm is not arming... this is due to one of three things usually: bad lock sensor, bad trigger sensor (doors, hood and hatch) or it's been disabled on purpose.

Dang... looks like I'm insecure...