mbc problems

dupra87 · 09-28-2009, 04:50 AM

hi i have a 87 supra. im new to the turbo set. so heres my question. i put a mbc on it, and no matter what i do i cannt change the boost. ive tried eveything i can think of. please any info will help. im sure there is no leaks or anything like that.

DarkSupra2.5 · 09-28-2009, 10:45 PM

Well, how'd you install it? controller between the wastegate and compressor side of the turbo properly?

dupra87 · 09-30-2009, 02:28 AM

thanks for reaplying. but ya it installed just a few different peps say on the forum too. ive tried every way but the right way. i know the controller works. i can blow air into as i turn and it works. i dont know dude fustrates me.

DarkSupra2.5 · 10-01-2009, 12:24 AM

if you can, pm me a pic of how you have it installed and I should be able to help you out ok? No need to stress, it'll get fixed ya kno?

dupra87 · 10-03-2009, 05:13 AM

i cannt send a pic not to sure how to anyways. im just going to play with it alittle bit more. if i cannt figure it out, ill just take it out. no biggy. i just shimmed it anyways so well see if that will aleast get me to 11 psi anyway thanks though i apprate it.

09-28-2009, 04:50 AM	#1
dupra87 Intake Join Date: Sep 2009 Location: fl Posts: 35	mbc problems hi i have a 87 supra. im new to the turbo set. so heres my question. i put a mbc on it, and no matter what i do i cannt change the boost. ive tried eveything i can think of. please any info will help. im sure there is no leaks or anything like that.

09-28-2009, 10:45 PM	#2
DarkSupra2.5 3" Exhaust Join Date: May 2008 Location: Sacramento Posts: 60	Well, how'd you install it? controller between the wastegate and compressor side of the turbo properly? __________________ 1jz-gte swap (Currently spun #3 rod bearings), Apexi high flow filter, Greddy thrust 3" downpipe, N1 3" catback with cat delete tube, 1 peice driveshaft, Bar and Plate intercooler, and 440 JDM 2jz injectors. Possible 2jz lower block swap in the works if I can't rebuild the 1j. So troublesome.

09-30-2009, 02:28 AM	#3
dupra87 Intake Join Date: Sep 2009 Location: fl Posts: 35	mcb problems thanks for reaplying. but ya it installed just a few different peps say on the forum too. ive tried every way but the right way. i know the controller works. i can blow air into as i turn and it works. i dont know dude fustrates me.

10-01-2009, 12:24 AM	#4
DarkSupra2.5 3" Exhaust Join Date: May 2008 Location: Sacramento Posts: 60	if you can, pm me a pic of how you have it installed and I should be able to help you out ok? No need to stress, it'll get fixed ya kno? __________________ 1jz-gte swap (Currently spun #3 rod bearings), Apexi high flow filter, Greddy thrust 3" downpipe, N1 3" catback with cat delete tube, 1 peice driveshaft, Bar and Plate intercooler, and 440 JDM 2jz injectors. Possible 2jz lower block swap in the works if I can't rebuild the 1j. So troublesome.

10-03-2009, 05:13 AM	#5
dupra87 Intake Join Date: Sep 2009 Location: fl Posts: 35	repply i cannt send a pic not to sure how to anyways. im just going to play with it alittle bit more. if i cannt figure it out, ill just take it out. no biggy. i just shimmed it anyways so well see if that will aleast get me to 11 psi anyway thanks though i apprate it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problems problems problems....	86SupraMan	MKIII Supra	5	02-04-2008 04:28 PM
Starting problems and accleration problems!	alekjame22	MKIII Supra	6	03-17-2007 11:19 PM
Oil leak problems	adellicson	MKIII Supra	1	03-04-2007 10:11 PM
random dying problems (1989 n/a)	thechori	MKIII Supra	11	11-06-2006 05:03 AM
problems, problems, and problems	tone loc	MKIII Supra	6	09-06-2006 04:35 AM