BHG symptoms...but no BHG?

[RNEMESiS42]

SO, I thought the easiest and cheapest thing to do would be to replace the thermostat for starters. I picked one up form NAPA and proceeded to replace it. The bolts for the thermostat housing were rusted, and BOTH of them broke at the head when I was using a socket to get them out. This left the rest of the bolts stuck on the part that's attached to the engine.
Does anyone know the part number for this so I can replace it? All I can find is the thermostat housing (number 8 in the picture below), not the piece that it attaches to.

[2jzmaestro]

good thing you asked.

i bought parts for my 2jz at http://toyotapartszone.com

they have something called "hot spots" on their digram

gives you all the parts name and number

its a really helpful website and cheap parts

hope this helps

[Bill UK]

Originally Posted by RNEMESiS42

The bolts for the thermostat housing were rusted, and BOTH of them broke at the head when I was using a socket to get them out. This left the rest of the bolts stuck on the part that's attached to the engine.

Use this website when searching for parts Link The water outlet housing part # is 16333-42040 price 35.72 Euro`s Gasket 16343-42020 at 2.0 Euro`s The studs are not listed, I think they are 6.0mm. You should be able to remove the broken studs with a stud extractor (easer said than done) or ask a machine shop to remove them, a lot cheaper than buying a new housing.