|
|
08-19-2009, 05:13 PM
|
#1 |
|
Stock
|
do you have a spare used cam sensor i need one for my 88 7mgte its my daily driver so i need to find one soon. my email is fleming.matt@rocketmail.com
|
|
|
|
08-19-2009, 06:12 PM
|
#2 | |
|
3" Exhaust
Join Date: Jan 2006
Location: Arizona
Posts: 96
 |
Quote:
codes? what is your harness, a manual or auto? what sounds/does it do when you try and start it? need more info man to help you. Last edited by shiftysupra; 08-19-2009 at 06:16 PM. |
|
|
|
|
|
08-20-2009, 09:22 PM
|
#3 |
|
3" Exhaust
Join Date: May 2008
Location: Gaithersburg, Maryland
Posts: 63
|
OK, I pulled the timing belt cover and the CPS and then double checked their alignment with TDC, Put it all back together and it started right up.
Of course now I have a really bad knock. Checked my valve clearances and 18 out of 24 are off anywhere from .001 to .003. I'm ordering new shims and then I will see if that took care of the knock.
__________________
1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week. |
|
|
|
 |
| Tags |
| cps, mhg, no spark |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
