Just replaced HG and now it won't start
 

Ok so I just replaced my HG and now I'm not getting spark. It's really getting frustrating. I made sure that it was at TDC before installing the CPS. I'm getting 12V at the coils and to the igniter. I checked the ground for the coils and it is good. I'm not sure what else to do. Once I get it running then I can adjust the timing.

Also once this is done I've got to do it again for my other Supra.

double check EVERYTHING lol. cams and crank at tdc? cps inserted with the hole aligned with the notch (on the gears.) try taking a wires out and have a buddy crank it to see if you have spark. now plugs and wires?

do you have a spare used cam sensor i need one for my 88 7mgte its my daily driver so i need to find one soon. my email is fleming.matt@rocketmail.com

dont hijack this thread, fallow the forum rules and search the for sale section or post a thread for items wanted.

codes? what is your harness, a manual or auto? what sounds/does it do when you try and start it? need more info man to help you.

OK, I pulled the timing belt cover and the CPS and then double checked their alignment with TDC, Put it all back together and it started right up.

Of course now I have a really bad knock. Checked my valve clearances and 18 out of 24 are off anywhere from .001 to .003. I'm ordering new shims and then I will see if that took care of the knock.