is there something wrong with my tranny?

CyFi6 · 07-23-2008, 09:13 PM

I am not talking about the clutch being new or not, it has to be in the proper adjustment and the fluid line, like a brake line, must be completely free of air, so you need to bleed it first to make sure its free of all air.

To check manual transmission fluid you need the car to be level, and you need to remove the fill plug on the transmission, the fluid level should be even with the bottom of the fill hole.

skatecboy45 · 07-24-2008, 12:51 AM

okay, how do I check if the clutch is adjusted right, and I have to bleed the transmission fluid?

CyFi6 · 07-24-2008, 12:56 AM

not quite. You need to first bleed the clutch line fluid, it is totally separate from the transmission fluid. It is the fluid link between your pedal and the actual clutch.

When you are letting off the clutch, where does it begin to engage? Middle of the pedal travel? Closer to the floor? Closer to the top? This can help dtermine the adjustment.

MK3 TSRM On-Line

That is the clutch bleeding procedure.

ochowdero · 05-04-2011, 04:28 AM

resurrection...
my pedal engages half way..
how do i adjust the free play?
and the spring over powers the pedal.. meening when i adjust it to be level it just pops it to the floor

05-04-2011, 04:28 AM	#4
ochowdero 12psi boost Join Date: Jun 2010 Location: California Posts: 277	resurrection... my pedal engages half way.. how do i adjust the free play? and the spring over powers the pedal.. meening when i adjust it to be level it just pops it to the floor __________________ 1987 supra, BLUE 7mge.. AUTO TO MANUAL SWAP.. i really want turbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tranny ? Need Info!	SilverBullet05	Non-Generation Specific Questions	0	07-07-2008 09:45 PM
Auto Tranny Issues?	jbjorndal	MKIII Supra	3	03-14-2008 09:31 AM
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
Having trouble getting motor separated from tranny...	shawn87gta	MKIII Supra	15	05-08-2006 05:16 AM

07-23-2008, 09:13 PM	#1
CyFi6 3" Exhaust Join Date: Oct 2007 Location: SLO Posts: 234	I am not talking about the clutch being new or not, it has to be in the proper adjustment and the fluid line, like a brake line, must be completely free of air, so you need to bleed it first to make sure its free of all air. To check manual transmission fluid you need the car to be level, and you need to remove the fill plug on the transmission, the fluid level should be even with the bottom of the fill hole.

07-24-2008, 12:51 AM	#2
skatecboy45 Stock Join Date: Jul 2008 Location: United States Posts: 10	okay, how do I check if the clutch is adjusted right, and I have to bleed the transmission fluid?

07-24-2008, 12:56 AM	#3
CyFi6 3" Exhaust Join Date: Oct 2007 Location: SLO Posts: 234	not quite. You need to first bleed the clutch line fluid, it is totally separate from the transmission fluid. It is the fluid link between your pedal and the actual clutch. When you are letting off the clutch, where does it begin to engage? Middle of the pedal travel? Closer to the floor? Closer to the top? This can help dtermine the adjustment. MK3 TSRM On-Line That is the clutch bleeding procedure.