coolant on top of piston

sevenmgte · 05-02-2008, 02:04 AM

i didn't know that i had to do the block too, so thats why i did not resueface the block last time. this time will sure do it, but i don't know if the block is still reusable does any one know? cause when i turn the crank shaft bolt to rotate the piston there's water/coolant on the wall of piston hole that sucks. one more thing, i drain oil and it was not mix with coolant.thats good right?

supramacist · 05-02-2008, 02:34 AM

It's going to have to be machined inside and out and you're going to have to buy real performance parts instead of just toyota oem.

I'm not sure that you shouldn't cut your losses.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heater Union (Coolant Leak)	slader99	MKIII Supra	11	12-28-2009 12:29 AM
Funky engine coolant issue	shirkinator	Non-Generation Specific Questions	1	06-22-2009 08:37 AM
shooting coolant out of reservoir/defunct heater	sd88supra	MKIII Supra	26	03-16-2009 01:34 AM
Coolant leak issues	D_Train	MKIII Supra	1	03-15-2007 04:30 AM

05-02-2008, 02:04 AM	#1
sevenmgte Intake Join Date: Mar 2006 Location: Oroville Posts: 31	i didn't know that i had to do the block too, so thats why i did not resueface the block last time. this time will sure do it, but i don't know if the block is still reusable does any one know? cause when i turn the crank shaft bolt to rotate the piston there's water/coolant on the wall of piston hole that sucks. one more thing, i drain oil and it was not mix with coolant.thats good right?

05-02-2008, 02:34 AM	#2
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	It's going to have to be machined inside and out and you're going to have to buy real performance parts instead of just toyota oem. I'm not sure that you shouldn't cut your losses.