Blown Head Gasket repair w/pics

IHateHacks · 12-30-2006, 12:06 AM

I've decided to send the head to a machine shop. I've gone this far I might as well go all the way. Cylinder walls still have crosshatch marks on them so it is a safe bet that this engine was rebuilt at some time. I've also determined my BHG was in cylinder 6. Spark plug insulator in cyl 6 was brown. All of the other spark plugs were normal. All of the valves looked the same in cylinders 1-5, cylinder 6 looked totally different. If you look closely at the last picture of the head gasket, look at the last cylinder to the right and look at the top, it is oval shaped. So it is determined that when this engine was rebuilt the HACK that put it back together hacked it up. Either overtorqued or did not torque in the right sequence.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown Head Gasket Symptoms!	Dejvid1785	MKIII FAQ	76	04-24-2011 07:59 PM
Blown Head Gasket Snake Oil	unkymurch	Non-Generation Specific Questions	21	08-06-2010 02:11 AM
1989 Supra blown head gasket	rayk5799	Non-Generation Specific Questions	6	05-18-2009 10:51 AM
Update: Blown Head Gasket Snake Oil - 8 months later	unkymurch	Non-Generation Specific Questions	3	12-17-2008 09:35 PM
Head gasket repair	Kuban	MKIII Supra	9	07-20-2007 09:01 PM

12-30-2006, 12:06 AM	#1
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	I've decided to send the head to a machine shop. I've gone this far I might as well go all the way. Cylinder walls still have crosshatch marks on them so it is a safe bet that this engine was rebuilt at some time. I've also determined my BHG was in cylinder 6. Spark plug insulator in cyl 6 was brown. All of the other spark plugs were normal. All of the valves looked the same in cylinders 1-5, cylinder 6 looked totally different. If you look closely at the last picture of the head gasket, look at the last cylinder to the right and look at the top, it is oval shaped. So it is determined that when this engine was rebuilt the HACK that put it back together hacked it up. Either overtorqued or did not torque in the right sequence.