I have a few ?s

boosted5mge · 09-08-2006, 04:54 AM

I did not go in depth with this. I have a 5mge with a 7mgte manifold and a CT26. the guy before me did the work and it needs help. I think I am going to run an SCE titan copper head gasket about .060 thick. how does that sound.

midwestmk2 · 09-08-2006, 05:10 AM

That should be about right for your apllication ..

boosted5mge · 09-08-2006, 05:13 AM

If the head gasket will work then why are they not the same part number from any company at all. What exactly is different about them. Thanks

midwestmk2 · 09-08-2006, 05:23 AM

There is no real difference..The 5,6,and 7m all use the same blocks they just vary in the stroke and the 7mgte also came with oil squirters in the block..One of the major things you notice are the heads..The 7m went to the 24 valve cylinder heads..The 6m is a 3.0 motor that uses the 7m bottom end with the 5m head..The 6m has its own special crank timing gear to make up for the stroke difference..The front timing covers are also different but still bolt up the same just a slightly different shape casing..The exhaust gaskets are the same shape also..

boosted5mge · 09-08-2006, 05:32 AM

Thanks for all the help. Do you know of anyone personally that has boosted a 5mge. If so, what should I look for as far as problems. Thanks

midwestmk2 · 09-08-2006, 05:40 AM

All i can say is beware of starvation..If she runs lean she wont run for long..
You may like this site.. http://www.geocities.com/aarongarney/5mgte.html

If you havent yet then you might also frequent http://forums.celicasupra.com/

Id love to see some pics of the setup..Always looking for more research for when i go for it..

boosted5mge · 09-08-2006, 12:27 PM

I have a walbo 255 in the tank and an aeromotive regulator with the boost reference on it, BUt I need bigger injectors and a fuel management.

09-08-2006, 05:10 AM	#2
midwestmk2 3" Exhaust Join Date: May 2005 Location: STL ,MO. Posts: 206	That should be about right for your apllication .. __________________ 83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2

09-08-2006, 05:23 AM	#4
midwestmk2 3" Exhaust Join Date: May 2005 Location: STL ,MO. Posts: 206	There is no real difference..The 5,6,and 7m all use the same blocks they just vary in the stroke and the 7mgte also came with oil squirters in the block..One of the major things you notice are the heads..The 7m went to the 24 valve cylinder heads..The 6m is a 3.0 motor that uses the 7m bottom end with the 5m head..The 6m has its own special crank timing gear to make up for the stroke difference..The front timing covers are also different but still bolt up the same just a slightly different shape casing..The exhaust gaskets are the same shape also.. __________________ 83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2

09-08-2006, 05:40 AM	#6
midwestmk2 3" Exhaust Join Date: May 2005 Location: STL ,MO. Posts: 206	All i can say is beware of starvation..If she runs lean she wont run for long.. You may like this site.. http://www.geocities.com/aarongarney/5mgte.html If you havent yet then you might also frequent http://forums.celicasupra.com/ Id love to see some pics of the setup..Always looking for more research for when i go for it.. __________________ 83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-08-2006, 04:54 AM	#1
boosted5mge Stock Join Date: Sep 2006 Location: Clifford, IN Posts: 10	I did not go in depth with this. I have a 5mge with a 7mgte manifold and a CT26. the guy before me did the work and it needs help. I think I am going to run an SCE titan copper head gasket about .060 thick. how does that sound.

09-08-2006, 05:13 AM	#3
boosted5mge Stock Join Date: Sep 2006 Location: Clifford, IN Posts: 10	If the head gasket will work then why are they not the same part number from any company at all. What exactly is different about them. Thanks

09-08-2006, 05:32 AM	#5
boosted5mge Stock Join Date: Sep 2006 Location: Clifford, IN Posts: 10	Thanks for all the help. Do you know of anyone personally that has boosted a 5mge. If so, what should I look for as far as problems. Thanks

09-08-2006, 12:27 PM	#7
boosted5mge Stock Join Date: Sep 2006 Location: Clifford, IN Posts: 10	I have a walbo 255 in the tank and an aeromotive regulator with the boost reference on it, BUt I need bigger injectors and a fuel management.