|
|
#4 |
|
walbro fp
Join Date: Dec 2010
Location: spokane
Posts: 479
![]() |
i have a few sets of injectors that might work for you.
set of ls1 36#hr injectors w/clips, low Z (off 98 buick regal supercharged motor) set of injectors from buick pk ave ultra (supercharged) 24#hr with clips can prolly work up some toyota injector clips too. i have a set of 5m connecting rods too, id just shot peen them and have them reconditioned, then balance everything. (balancing rod/pistons isnt that hard, and most piston kits are already balanced +/- .5 grams, the crank is the only piece that the machine shop would do, or just have them do it all for like 250-275) u can use the turbo type piston kits from the 7mge as they are the same bore increments, that would take care of the pistons and rings. bearings id go with clevite 77's or king/acl. u can pick up an hks mhg on ebay for 100 delivered, 1.2mm thickness an f1 racing clutch wouldnt be bad, stage 2 is a carbon disk hd unit, thats what im using and they get decent reviews, mine was 150 shipped. i have a couple 7m oil pumps, ones a supra style mid sump, the other is a front sump style. ive cleaned them, but havent checked lash. they both were in running motors.
__________________
87 toyota 4x4 single cab short box pickup, 7MGZE. Last edited by 87hilux7mge; 05-03-2011 at 08:13 AM. |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 7mge build with some questions. | 87hilux7mge | MKIII Supra | 34 | 06-11-2014 09:04 AM |
| My First Build | Cameroonski | MKIII Supra | 7 | 01-04-2011 11:42 AM |
| Cannot build up boost :( | azerty | MKIII Supra | 4 | 04-22-2009 03:56 AM |
| 3.4 bored out stroked supra build | Fredy171787 | MKIII Supra | 2 | 04-12-2008 03:10 PM |
| Mad Carbon Build Up | supraman121 | MKIII Supra | 2 | 04-24-2007 04:22 PM |