5m build

[CanadianBak'inSupra]

http://www.toyota-supra.info/forums/...albums197.html

5m Turbo
----------
Parts needed*

*IC and more piping
*Low compression pistons
*7m Metal HG
*better connecting rods.
*Bearings all around.
*rings
*clutch that can handle a turbo
*Lash adjusters for head.
*injectors and clips
i have yellow top 7m n/a's but i need clips.
*fuel pump
*FMU
*ct26 heat shield
*adjustable cam gears
*oil Pump

list is gona grow, i got alot going on this summer so its gona be slow...
any advice would be awesome. this is my first 5m build up!!!

[CanadianBak'inSupra]

have a complete 5m block.
after hitting it with a strait edge its been stripped down.

while removing the crankshaft i noticed bearings for connecting rods in cylinders 2,5,and 6 were warped.

cylinder walls are looking rough, im thinking im gona get them bored.

[CanadianBak'inSupra]

5m block is in for machine work, possible bore, but i am still looking for pistons
crankshaft is getting reground, and fitted for new bearings.

and i am staying with stock rods.

[87hilux7mge]

i have a few sets of injectors that might work for you.

set of ls1 36#hr injectors w/clips, low Z (off 98 buick regal supercharged motor)

set of injectors from buick pk ave ultra (supercharged) 24#hr with clips

can prolly work up some toyota injector clips too.

i have a set of 5m connecting rods too, id just shot peen them and have them reconditioned, then balance everything. (balancing rod/pistons isnt that hard, and most piston kits are already balanced +/- .5 grams, the crank is the only piece that the machine shop would do, or just have them do it all for like 250-275)

u can use the turbo type piston kits from the 7mge as they are the same bore increments, that would take care of the pistons and rings.

bearings id go with clevite 77's or king/acl.

u can pick up an hks mhg on ebay for 100 delivered, 1.2mm thickness

an f1 racing clutch wouldnt be bad, stage 2 is a carbon disk hd unit, thats what im using and they get decent reviews, mine was 150 shipped.

i have a couple 7m oil pumps, ones a supra style mid sump, the other is a front sump style. ive cleaned them, but havent checked lash. they both were in running motors.

[CanadianBak'inSupra]

this is gona have to be set back a year or so i just picked up a lexus LS400 with a 1UZ that i plan on swapping.

so my 5mgte build will be on the bench for a while...
but thanks for reply

[87hilux7mge]

hell yea man, thats sick that you found a 1uz, i cant find one here for beans. last one i found the guy wanted like 1500 for the motor with over 180k on it.

itll be sick in the car tho, super light and way powerful.

ill prolly have lots of these parts for a while neway, im a pack rat lol. lemme know if you wanna toss a supercharger on top of that 1uz i got a couple layin around haha.

good luck with it man!