|
|
03-21-2007, 06:44 AM
|
#1 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
 |
Couple of updates...
New door lock bezels straight from Toyota, along with the slave cylinder hardline I bent the hell out of putting the engine in.  Brand new accordian hose from Horse Power Freaks  I will have more pics of the other things i'm getting on Friday night. |
|
|
|
03-23-2007, 06:32 PM
|
#2 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
New parts from Driftmotion!
New Aisin Slave Cylinder  2.5" IC pipes with a TiAL BOV adapter with two 2.5" to 2.25" couplers  On Tuesday next week I'll be getting my TiAL BOV. I need a driveshaft. I found one in Miami but the guy wants $150 and I'm not looking to spend that much. But if I can't find one soon I'll give in and go buy it. I'll put the intercooler and the piping on tomorrow if it doesn't rain. |
|
|
|
|
03-28-2007, 12:02 AM
|
#3 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
I bought a few new parts. I have 89+ tail lights and a drive shaft coming to me. I'm having some trouble putting the intercooler pipes in, lol. But I'll get it eventually.
A couple of parts.... A used Stewart Warner Boost Gauge  And a new TiAL 50mm BOV   
|
|
|
|
|
03-29-2007, 04:20 AM
|
#4 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
Another new part
 Adjustable Fidanza Cam Gears I put the new slave cylinder and hardline in earlier today and replaced the broken ISC hose with a piece of 5/8" heater hose because i broke it by accident. I also installed the boost gauge. I just shoved it into the ashtray slot for now. So now all thats left is hooking up the IC piping and the driveshaft. And then it's on the road. |
|
|
|
|
03-29-2007, 02:06 PM
|
#5 |
|
500whp yet?
Join Date: Nov 2005
Location: Mechanicsville, MD, US of A, 20659
Posts: 1,060
|
man you're on a roll
__________________
88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat |
|
|
|
|
03-29-2007, 06:14 PM
|
#6 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
Lol. I'm about done with this roll. I just have a couple more things coming. A driveshaft and 89+ tails. Now it's just a waiting game until something breaks or blows. Only a MKIII Supra owner would say that.
 Which is when I'll start my rebuild. Then I'll be on another more expensive roll in which each part will cost $500+. Lol
|
|
|
|
|
04-05-2007, 07:58 AM
|
#7 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
Ok, well I got all the intercooler piping on, the blow off valve hooked up, the driveshaft on, and fluid in the transmission. I went to hook up the clutch and realized I had to get a new rubber hose that is a Toyota only part. So that ended my fun because I swore to myself that today would be the day it drove. So now all I do is sit in the car, rev it, and pretending like I'm driving. It's sad. :3d_frown: . I had to buy a new battery also cuz my last one was dead. On another note, I got all my dash lights working. It was the stupid dimmer switch. I had an extra one laying around. Although I could've sworn I changed it. It looks pretty bad ass at night with all red. I'll take a pic and post it here.
I guess I hooked up my boost gauge wrong because it's not reading boost. I'll fix that another day tho. |
|
|
|
 |
|
|
Hybrid Mode
