change engines

cody_18_06 · 11-14-2005, 11:55 PM

i normally search google or msn for info it gets me some info

WiseAssJester · 11-15-2005, 03:13 AM

Yeah, I'm looking again and again. Yahoo, Google specifically.

I found the bore and stroke, boost levels, compression levels, ect. A very informative site(http://www.jza70.com/articles/engine...omp_chart.html).

But nothing about materials used for construction. I'd imagine its an aluminum head, but don't know for sure. Are the pistons forged? What're the rods rated to? Valve sizes.

Haha. Thanks for answering, mang.

FullOfProblemsMKIII · 04-10-2006, 08:43 PM

doing 7mge to 7mgte swap is a BITCH....the 89 supra had yellow plus for the ecu and the 87 had grey plugs...THUS i had to rip the harness from the WHOLE DASH to the headlights and swap it into my 87....and change the mounts on the 7mgte with the 87 n/a mounts....and im using my w58 tranny temporarly untill i get a r154 turbo tranny....but yeah....thats the swap....

04-10-2006, 08:43 PM	#3
FullOfProblemsMKIII 3" Exhaust Join Date: Feb 2006 Location: Long Island Posts: 71	doing 7mge to 7mgte swap is a BITCH....the 89 supra had yellow plus for the ecu and the 87 had grey plugs...THUS i had to rip the harness from the WHOLE DASH to the headlights and swap it into my 87....and change the mounts on the 7mgte with the 87 n/a mounts....and im using my w58 tranny temporarly untill i get a r154 turbo tranny....but yeah....thats the swap.... __________________ oh shit sry officer....you caught me spoolin....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JDM 6MGE engines avilable	Supra Goddess	MKII Supra	12	03-27-2015 12:32 AM
7mgte-1jz-mk engines	supraquest	Non-Generation Specific Questions	2	01-07-2009 07:46 PM
Change the climate cntrl color?	XtreeX	MKIII Supra	6	05-10-2008 01:54 PM
Why are JDM engines available at all?	finaltable	Non-Generation Specific Questions	3	06-09-2007 12:51 AM
Should I STILL change head gasket??	lifesnotfair	MKIII Supra	7	01-13-2006 01:08 AM

11-14-2005, 11:55 PM	#1
cody_18_06 Stock Join Date: Oct 2005 Location: mn Posts: 19	i normally search google or msn for info it gets me some info

11-15-2005, 03:13 AM	#2
WiseAssJester 3" Exhaust Join Date: Sep 2005 Location: Reno Posts: 77	Yeah, I'm looking again and again. Yahoo, Google specifically. I found the bore and stroke, boost levels, compression levels, ect. A very informative site(http://www.jza70.com/articles/engine...omp_chart.html). But nothing about materials used for construction. I'd imagine its an aluminum head, but don't know for sure. Are the pistons forged? What're the rods rated to? Valve sizes. Haha. Thanks for answering, mang.