1983 corolla 5mge project.

ianstaley · 11-20-2012, 12:09 PM

What a pair of great reply's so now I know that I keep to the 7M when I need to do some work. I already have ARP bolts and I have a Cometic head gasket. I don't think I will change the engine much, I have and will replace the GE with a GTE uprated oil pump, I have a Fluidyne Ally rad and twin Electric fans to fit, Ally pulley set and some other stuff. Did I say I have owned her from new, delivered to me in Germany in 1987 with 5 kilometres on the clock.

CanadianBak'inSupra · 11-20-2012, 01:27 PM

awesome. the 87 mk3 is my favorite. If you went with a multi layer steel hg get the block and head resurfaced. You will be vary satisfied with your arps I think.

CanadianBak'inSupra · 01-09-2013, 03:13 PM

i finally purchased the clutch line, and the fuel pump. i went for a walbro in tank.
i still havnt touched the wiring much, i need to buy beer and get some friends over to help.

also goning start fabricating mount to hold a radiator infront of the rad support, i have blocked up the front bumper a little over 2 inches. it should be enough to hide a rad and a fan maby??

CanadianBak'inSupra · 01-09-2013, 07:48 PM

as it sits now:

This is going to be a problem...

11-20-2012, 12:09 PM	#1
ianstaley Stock Join Date: Nov 2008 Location: Pontefrac Posts: 24	What a pair of great reply's so now I know that I keep to the 7M when I need to do some work. I already have ARP bolts and I have a Cometic head gasket. I don't think I will change the engine much, I have and will replace the GE with a GTE uprated oil pump, I have a Fluidyne Ally rad and twin Electric fans to fit, Ally pulley set and some other stuff. Did I say I have owned her from new, delivered to me in Germany in 1987 with 5 kilometres on the clock. __________________ Bored old git that loves his toyota's I have two one a Supra MK3 with a targa top the other is a brit Camry V6.

11-20-2012, 01:27 PM	#2
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	awesome. the 87 mk3 is my favorite. If you went with a multi layer steel hg get the block and head resurfaced. You will be vary satisfied with your arps I think. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

01-09-2013, 03:13 PM	#3
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	i finally purchased the clutch line, and the fuel pump. i went for a walbro in tank. i still havnt touched the wiring much, i need to buy beer and get some friends over to help. also goning start fabricating mount to hold a radiator infront of the rad support, i have blocked up the front bumper a little over 2 inches. it should be enough to hide a rad and a fan maby?? __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

01-09-2013, 07:48 PM	#4
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	as it sits now: This is going to be a problem... __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1987 Toyota Supra MKIII 350 Chevy / 700R4 Project Car	Vacationtime247	Show n Tell	4	06-04-2009 03:53 AM
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
5mge intake manifold upgrade	Allen Crump	Non-Generation Specific Questions	1	11-02-2006 01:53 AM
Project Cars & Editors Needed	THRUST	Off Topic Forum	2	09-27-2005 03:56 PM
help on 5mge turbo	Guest	MKII Supra	7	05-31-2005 07:49 PM