Next step: The Intercooler

azerty · 08-02-2009, 04:54 AM

Hi.
So, I need to upgrade my intercooler.
But there are so many tipes/manufacturers of this things that I cannot make my mind.
What do you use/recomend. What are the differences between the different designs?
Second, wich is the rute you go when buying a universall intercooler (inlet opposed to the outlet)?
I really would like to customize my intercooler pipes rather than buying a kit.
How big should I go with the intercooler? I have a stock CT26, but looking to upgrade in the future.
Many thanks.

shiftysupra · 08-19-2009, 09:22 AM

i currently have the cx racing one. it's pretty huge however depending on what your planning to upgrade to in the future im not sure this will be sufficient. i will eventually have to get ss tubing welded because im going to be running 15+ psi and dont trust only clamps. mine is inlet and outlet on opposite sides, but if your not planning on a ffim in the near future i would recommend just getting the spearco replica or something of that sort.

08-02-2009, 04:54 AM	#1
azerty 3" Exhaust Join Date: Sep 2007 Location: Romania Posts: 96	Next step: The Intercooler Hi. So, I need to upgrade my intercooler. But there are so many tipes/manufacturers of this things that I cannot make my mind. What do you use/recomend. What are the differences between the different designs? Second, wich is the rute you go when buying a universall intercooler (inlet opposed to the outlet)? I really would like to customize my intercooler pipes rather than buying a kit. How big should I go with the intercooler? I have a stock CT26, but looking to upgrade in the future. Many thanks. __________________ 1988 yelow manual turbo targa HKS ssqv bov Hose Techniques silicon hoses Forge manual boost controller boost gauge K&N FIPK ACT clutch kit HD-G6 Fidanza lightened flyweel 550cc RC Injectors 255lph Walbro Fuel Pump LIPP Lexus AFM Replica 3" turbo back echaust with divorced downpipe and no cats. Aeromotive FPR Aem Uego Wideband Gauge+O2 sensor

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ma70 intercooler	SCRAMJET	MKIII Supra	1	02-17-2009 01:08 PM
Clean out your intercooler!!	IHateHacks	MKIII Supra	4	10-25-2007 08:33 AM
Intercooler restriction?	gomezmk	MKIII Supra	0	03-03-2007 02:11 AM
Which Aftermarket Turbo? Intercooler?	RoLLiN	MKIII Supra	1	06-10-2006 06:57 AM
Intercooler	Fuel	Non-Generation Specific Questions	9	01-11-2006 06:54 AM

08-19-2009, 09:22 AM	#2
shiftysupra 3" Exhaust Join Date: Jan 2006 Location: Arizona Posts: 96	i currently have the cx racing one. it's pretty huge however depending on what your planning to upgrade to in the future im not sure this will be sufficient. i will eventually have to get ss tubing welded because im going to be running 15+ psi and dont trust only clamps. mine is inlet and outlet on opposite sides, but if your not planning on a ffim in the near future i would recommend just getting the spearco replica or something of that sort.