replacing knock sensors and rewiring

Gunnar · 06-08-2008, 08:27 AM

I'm gonna do mine too soon, replaced the wiring and it didn't help, so now i'll do the sensors.
Since i'll be doing the lexus AFM and injectors swap i'll have the intake partly disassembled anyway so might as wel go from the top.

dcrusupra · 06-09-2008, 01:25 AM

Assuming you have a 7M-GTE it will be moderately hard. The front knock sensor is somewhat easy to put the connector on it. The second one near the back of the motor is pretty damn hard but not impossible to put on without taking anything off. I've done it. You wont be able to see the connector so you will have to do that one by touch alone without taking it off. I did the front one from the top of the engine bay and the back one from under the car.

06-09-2008, 01:25 AM	#2
dcrusupra 500whp yet? Join Date: Aug 2005 Location: Plantation, Fl. Posts: 1,052	Assuming you have a 7M-GTE it will be moderately hard. The front knock sensor is somewhat easy to put the connector on it. The second one near the back of the motor is pretty damn hard but not impossible to put on without taking anything off. I've done it. You wont be able to see the connector so you will have to do that one by touch alone without taking it off. I did the front one from the top of the engine bay and the back one from under the car. __________________ New Rebuild My CarDomain

06-08-2008, 08:27 AM	#1
Gunnar Intake Join Date: Sep 2007 Location: Belgium Posts: 38	I'm gonna do mine too soon, replaced the wiring and it didn't help, so now i'll do the sensors. Since i'll be doing the lexus AFM and injectors swap i'll have the intake partly disassembled anyway so might as wel go from the top.