|
|
07-02-2011, 04:21 AM
|
#1 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
 |
Quote:
Alternatively, with the right tools you can do it yourself on high jackstands in about eight hours (you'll need a buddy's help during the job at two points, for about 15 minutes each time). You'll need to study the steps ahead of time, and be sure you have *everything* ready: http://www.mkiv.com/techarticles/clutch/index.html P.S. Don't give these instructions to 'bubba' at your local tranny shop - I can promise you he'll mess it up. A Getrag 6spd transmission is about $6K from Toyota......
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. Last edited by pwpanas; 07-02-2011 at 04:27 AM. |
|
|
|
|
07-02-2011, 04:50 PM
|
#2 |
|
Stock
Join Date: Jul 2011
Location: fl
Posts: 2
|
Thanks.
Where are you located at in GA? |
|
|
|
|
07-02-2011, 06:28 PM
|
#3 | |
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+ Displacement is no replacement for boost. Life begins at 30psi. NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners. |
|
|
|
|
|
07-03-2011, 09:09 AM
|
#4 | |
|
3" Exhaust
Join Date: Jun 2009
Location: Guam
Posts: 56
|
Quote:
X2 on not letting any shop do the change. With such a critical component, it can be messed up pretty easy. If you have the tools and know-how to do it yourself, I would suggest that. |
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clutch kit for a 1993 JDM Toyota Supra | SpRuCe | Non-Generation Specific Questions | 0 | 04-13-2009 10:20 PM |
| HElp with sports clutch!! | whitequasimodo | MKIII Supra | 3 | 05-07-2008 11:06 PM |
Hybrid Mode
