08-29-2007, 05:56 PM
|
#1 |
|
3" Exhaust
Join Date: May 2007
Location: santa barbara
Posts: 56
 |
engine harness trouble
so a while back i bought a engine wiring harness from mizubo and it doesn't fit. i was told that the harness was from a 89 turbo auto but apparently its not. the problem is that it will not reach to the 6th injector. therefore the connectors for the starter and trans will not reach. im kinda lost on what to do, any help guys?
oh and i've pm'd the guy but he wont respond
__________________
1989 supra turbo automatic soon to become a manual K&N, megan dp, gutted cat, 2 1/2" magnaflow cat back NA intake cam, shimmed actuator no A/C or P/S, therefore no ac condensor, compressor and no ps pump or resivior. gutted interior, 4 tweeters, 2 kicker 12"s powered by an MTX 400W 350rms and an audiobahn 400W 300rms |
|
|
|
08-30-2007, 12:45 AM
|
#2 |
|
12psi boost
Join Date: Aug 2006
Location: North Carolina
Posts: 361
|
Have you seen how much it would cost to get that part of the harness extended, spliced or anything like that? use part of the old one with the new one? Dont no if that will help but you could look into it.
__________________
Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~ |
|
|
|
|
08-30-2007, 04:41 PM
|
#3 |
|
3" Exhaust
Join Date: May 2007
Location: santa barbara
Posts: 56
|
thats what ima try to dy myself. is solder some extensions on. but this is BS, shouldn't all the wiring harnesses be the same length?
__________________
1989 supra turbo automatic soon to become a manual K&N, megan dp, gutted cat, 2 1/2" magnaflow cat back NA intake cam, shimmed actuator no A/C or P/S, therefore no ac condensor, compressor and no ps pump or resivior. gutted interior, 4 tweeters, 2 kicker 12"s powered by an MTX 400W 350rms and an audiobahn 400W 300rms |
|
|
|
|
08-30-2007, 05:03 PM
|
#4 |
|
500whp yet?
Join Date: Nov 2005
Location: Mechanicsville, MD, US of A, 20659
Posts: 1,060
|
what do you mean it wont reach the sixth injector? the clip wont reach or the harness wont reach? is it by a couple inches or a like 2-3 feet? only asking cause im wondering if you got a rhd harness. either way, you can just extend it. just get some stranded 12 or 14 awg wire and some red butt connectors and electrical tape. when i damaged my harness, thats all i did and it worked fine, cant even tell where i spliced it
__________________
88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat |
|
|
|
|
08-30-2007, 06:29 PM
|
#5 |
|
3" Exhaust
Join Date: May 2007
Location: santa barbara
Posts: 56
|
the harness wont reach by like a foot.. but when i test fitted it everything else looked like it would be able to make the stretch.. i hope it does
__________________
1989 supra turbo automatic soon to become a manual K&N, megan dp, gutted cat, 2 1/2" magnaflow cat back NA intake cam, shimmed actuator no A/C or P/S, therefore no ac condensor, compressor and no ps pump or resivior. gutted interior, 4 tweeters, 2 kicker 12"s powered by an MTX 400W 350rms and an audiobahn 400W 300rms |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| engine rewiring trouble | mizuboi | MKIII Supra | 0 | 01-09-2008 08:33 AM |
| 7mge engine harness | 77celi | MKIII Supra | 19 | 07-15-2007 07:51 PM |
| Engine Harness question | kidsusukigsxr | Non-Generation Specific Questions | 0 | 01-31-2007 05:33 AM |
Linear Mode
