EGR removal

west_side_supra · 07-16-2007, 07:23 PM

well i did some searchese this is what i found

http://toyotaownersclub.com/forums/i...howtopic=39095
http://www.supramania.com/forums/showthread.php?t=386

7mgte removal of charcoal canister and EGR

Now remove the vacuum hoses that are highlighted in red. And cap off the vacuum ports that I highlighted in green. That’s all there is to it for a stock setup.

as for the blocking off i was reading a little more on this, if i got this right the right red circle you want blocked off. but as for the right one you dont want to block off, the 2nd block off goes onto the intake plenum heres a pic of that

7mge removal of charcoal canister and EGR

Same thing as before. Red are the vacuum lines you can remove and the green is the places to cap. And the blue dots are pieces that you can remove.

"NOTE"
i got all this information from other peoples post, so dont try to think im smart

07-16-2007, 07:23 PM	#7
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	well i did some searchese this is what i found http://toyotaownersclub.com/forums/i...howtopic=39095 http://www.supramania.com/forums/showthread.php?t=386 7mgte removal of charcoal canister and EGR Now remove the vacuum hoses that are highlighted in red. And cap off the vacuum ports that I highlighted in green. That’s all there is to it for a stock setup. as for the blocking off i was reading a little more on this, if i got this right the right red circle you want blocked off. but as for the right one you dont want to block off, the 2nd block off goes onto the intake plenum heres a pic of that 7mge removal of charcoal canister and EGR Same thing as before. Red are the vacuum lines you can remove and the green is the places to cap. And the blue dots are pieces that you can remove. "NOTE" i got all this information from other peoples post, so dont try to think im smart __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR Last edited by west_side_supra; 07-16-2007 at 07:44 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine removal	mizuboi	MKIII Supra	11	06-10-2011 06:25 AM
Starter Removal question	OkieRA29	MKIII Supra	13	05-11-2010 12:08 AM
86.5 auto transmission removal HELP!!!	elmer	MKIII Supra	13	04-06-2010 10:41 PM
Fuse Removal + Nice Supra Pic	jdbones	Non-Generation Specific Questions	0	01-28-2008 01:01 AM
Is this true? Fuse removal can change limiter	jdbones	Non-Generation Specific Questions	0	12-30-2007 10:31 AM