Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 07-19-2007, 12:49 AM   #11
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

ok now im having the problem were the clamps are loosening themselves. everyday im having to tighten the clamps on the ic pipes, even my newest ones the T-bolt spring loaded ones are loosening themselves
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 07-24-2007, 11:32 AM   #12
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

ok so get this i paid 15$ to get my problem fixed tell me what you think

Before

after



and the most recent exterior shot for you who havent seen it yet
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR

Last edited by west_side_supra; 07-24-2007 at 11:36 AM.
west_side_supra is offline   Reply With Quote
Old 07-24-2007, 06:26 PM   #13
gpgtp_22
3" Exhaust
 
Join Date: Jan 2006
Location: Wisconsin
Posts: 80
gpgtp_22 is on a distinguished road
Default

That was a good idea and it looks good too.
gpgtp_22 is offline   Reply With Quote
Old 07-25-2007, 03:21 AM   #14
Supra2NR
1000whp postwhore
 
Supra2NR's Avatar
 
Join Date: Apr 2006
Location: Chi-Town
Posts: 1,643
Supra2NR is on a distinguished road
Default

holy crap, thats a long pipe going across the engine bay, lol

well more heat absorb from the turbo right?
i would use sum heatshield wrapping on that part if i was you
__________________
http://www.myspace.com/supra_2nr



Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol
Supra2NR is offline   Reply With Quote
Old 07-25-2007, 03:57 AM   #15
supramacist
1000whp postwhore
 
supramacist's Avatar
 
Join Date: Apr 2007
Location: Escape from the Prison Planet
Posts: 1,356
supramacist is on a distinguished road
Default

Those euro lamp covers look good.
supramacist is offline   Reply With Quote
Old 07-25-2007, 08:16 AM   #16
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

thanks guys, mm well yea i was planing on getting some heat wrap to put over it. something weird happened today though. im driving and it was a pretty long distant drive. the coolant resivour usally overflows on trips like this but it didnt on this one. so on the way back i was stuck in bumper to bumper traffic and then i noticed my engine temp was on H and almost in the red zone. so i quickly pulled off to the side checked it out. spit on the turbo and it wasnt running hot enough to sizzle the spit. but the valve covers where really hot. next i checked the coolant resiviour and it was full and looked like it was about to overflow, so i waited a little longer so i could take off the radiator cap, it was steaming when i took it off. lots of pressure but there was no coolant visible.

now i know i need to purge the coolant system cause it does the waterfall sound during warmups and after sitting at idle for a long time. but what do you guys think is going on here, mainly the overflowing of coolant. cause im getting tired of buying coolant to put in there almost every week.
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 07-25-2007, 08:54 PM   #17
IHateHacks
20psi boost
 
IHateHacks's Avatar
 
Join Date: May 2006
Location: New Haven/Hamden
Posts: 793
IHateHacks is on a distinguished road
Default

Holy crap. Dude, I know it sounds very cliche but, you definately have a blown head gasket. When you said "the coolant resivour usally overflows on trips like this" that is a dead give away. I don't care if its 120 degrees out and you are redlining it, the overflow should never overflow unless you have combustion gases entering the radiator, period. You have the same symptoms that my car had but yours are alot more severe because you just keep driving it. All it took was for mine to overheat once and the overflow was overflowing and I got sick of it and tore the bitch down. Some days it will overheat and some days it won't right?

That pipe you used looks like a downpipe.

Nice stock air box
IHateHacks is offline   Reply With Quote
Old 07-26-2007, 12:26 AM   #18
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

damn you i didnt want to hear that. how much you think it'll cost to get the head & block machined. HKS metal beaded/stopper? <right one to use. and how about thickness i noticed there is a couple of them.? and cant forget that ARP hardware.
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 07-26-2007, 07:18 PM   #19
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

and are you sure that it is the HG that is blown because i have a friend that had the same problem and it ended up just being the radiator cap. oil is black in color not milky, the exhaust is fine it doesnt feel slick, its not steaming at all. i mean overall the car seems good it just overflows coolant, and again when it was overheating the radiator cap wasnt steaming till i took it off.
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Old 07-26-2007, 08:40 PM   #20
west_side_supra
12psi boost
 
west_side_supra's Avatar
 
Join Date: Sep 2006
Location: Marysville Washington
Posts: 353
west_side_supra is on a distinguished road
Default

ok so i have a freind that works at waltz and i had him test a buch of stuff.
pressure test = OK no leaks didnt go below 6/lbs of pressure it held
block test = OK - didnt change colors
radiator cap test = 10/lbs OK

diagnostics = needs to be flushed air bubbles in the heater core

does this sound still like a BHG? or do you think it is right, because i know it has bubbles in the heater core because its doing the waterfall sound

he also mentioned that the coolant was at boiling point but that is probably because there is more water than coolant. didnt feel like spending a but load of money on coolant every week :O)
__________________

7MGTE - 500hp never dyno'd
exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate
fidenza cam gears
intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/
fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator
transmission: Fidenza flywheel/ACT extreme kit
electronics: map ecu 1 / HKS EVC 9
gauges:boost,EGT,oil temp & pressure/aem AFR
west_side_supra is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP PLEASE Nick0887 Non-Generation Specific Questions 4 02-28-2009 07:26 AM
Dream Offer Karma_Supra MKIV Supra 22 10-17-2007 03:04 PM
Sequential Turbo Question suprapoweredsoarer MKIV Supra 1 06-06-2006 12:13 AM


All times are GMT. The time now is 06:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87