|
![]() |
#1 |
12psi boost
Join Date: May 2006
Location: Athens, TX
Posts: 308
![]() |
![]()
Nice 1GGTE I would look into modding the turbines if even just getting them polished. I dont know much about the 1GGTE except it is pretty much a 7M with twin turbos on it. I have the optional engine in my swap the 1JZGTE I love driving this car I cant wait to put all my upgrades that I have on order on it to see what it can really do.
__________________
1987 supra NA 5 speed 1JZGTE swap Tokico Illumina 2 and Eibach springs Tokico pillow blocks Suspension Techniques front and rear sway bar HKS super dragger cat-back exhaust plus test pipe Greddy Profec B spec 2 boost controller HKS type 1 turbo timer Supra sport solid steel drive shaft Walboro 255 fuel pump JZA70 Front end mod 18" Volk Racing AV3 18x8.5 front 18x9.5 rear |
![]() |
![]() |
![]() |
#2 |
SP58GT
Join Date: Jul 2005
Location: USA
Posts: 633
![]() |
![]()
The 1G is hardly a 7m... twin turbo 2 liter with 200hp. Not too many people have modded them, I'm curious to see what they can do. I'm sure 300+hp is doable.
__________________
Nate ![]() ![]() |
![]() |
![]() |
![]() |
#3 |
12psi boost
Join Date: May 2006
Location: Athens, TX
Posts: 308
![]() |
![]()
Actually I looed into it and in a breakdown of the motor the 1GGTE and the 7M share a lot of parts. I know the intake manifold on the passenger side of that car is the same and the block is too just the head and stroke are different. Just as I have found the 1JZGTE and the 2JZGTE share almost every part except the crank rods and pistons. The head is also slightly different. What I was told by a Japanesse friend of mine is that the 1GGTE is a redesigned 7MGTE with twin turbos if you see one without the exhaust manifolds and the pipeing on top you will see some similarities.
__________________
1987 supra NA 5 speed 1JZGTE swap Tokico Illumina 2 and Eibach springs Tokico pillow blocks Suspension Techniques front and rear sway bar HKS super dragger cat-back exhaust plus test pipe Greddy Profec B spec 2 boost controller HKS type 1 turbo timer Supra sport solid steel drive shaft Walboro 255 fuel pump JZA70 Front end mod 18" Volk Racing AV3 18x8.5 front 18x9.5 rear |
![]() |
![]() |
![]() |
#4 |
SP58GT
Join Date: Jul 2005
Location: USA
Posts: 633
![]() |
![]()
So I guess I could destroke my 7m by using a 1g crank then right? Can you show me a link to where the 7m and 1G are using the same block?
__________________
Nate ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
![]() Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Nice, the body's alot cleaner than mine.
![]() So how much can you get me a set of JDM three piece taillights for? hehe. |
![]() |
![]() |
![]() |
#6 |
Intake
Join Date: Jun 2007
Location: tokyo
Posts: 43
![]() |
![]()
i could look for some, depending on how hard they are to find, i could get em and we could work out something if you really want some.
pm me if your serious, we'll talk im not to much of a fan of 1jz's or 2jz's, my friend had a 2jz in his mark 2 and that shit was alwasy having problems =/ |
![]() |
![]() |
![]() |
|
|