Valve stem seals?

IHateHacks · 03-27-2007, 01:17 AM

Wow, sounds like you had a fun time.

Yes, if your turbo seals are shot, you will burn oil like your rings were bad. So I think it was your problem all along. (why didn't I think of that!)

That sound you hear is your turbo dying.

As far as overheating, if the heater core hose blew and THEN it overheated then that would explain it. If it overheated and THEN the heater core hose blew, well then you have other issues.

My car overheated one day, I changed the thermostat and beat the shit outta it on the highway then next day and it didn't overheat. The following day I was driving and then out of nowhere it just pegged to the H and my aftermarket gauge read 230F. Thats when I got fed up and started my head gasket repair.

Kuban · 03-27-2007, 01:58 AM

yea the heater core hose blew initially, cause i saw the coolant behind me on the freeway (people getting out of my lane hahaha) and then the temp rose about 2 miles later.

I looked at it and one of the plastic male to male adaptors for the heater core i used melted on one side causing it piss all the coolant out into my engine bay! i got a new one of those, filled it up with coolant and she was ready to roll!

But when i drove about 10 miles, i heard the turbo doin that shit.

Yea im assuming this was the issue all along, although would that cause those pcv issues i was describing?

IHateHacks · 03-27-2007, 02:09 AM

Yes, if the turbo seals are shot, oil will get into the turbine housing and burn and oil will get into the compressor housing and neatly distribute itself all over your intercooler piping and intercooler.

Now when you ran the motor without coolant I'm guessing the turbo took the brunt of it. Seeing how turbo's get so hot its not even funny, so without coolant cooling it, the bearings will be destroyed in short order.

Kuban · 03-27-2007, 02:32 AM

hmm okay man. Maybe ill try just replacing the turbo and see how that goes. My friend has an extra i can try. If that doesnt do it ill replace the engine with a new built one. How much does a built mkiii with 550-650rwhp go for? Magenta color, mkiv rims, targa, body is immaculant. Apexi 7 way adjustables, eibach springs, new pads, new rotors, 285/40/17 tires in back, 245/45/17 tires in front, map-ecu tune. Ill list more later, but can i get like 9 maybe 10k for that? If its properly built?

03-27-2007, 01:17 AM	#1
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	Wow, sounds like you had a fun time. Yes, if your turbo seals are shot, you will burn oil like your rings were bad. So I think it was your problem all along. (why didn't I think of that!) That sound you hear is your turbo dying. As far as overheating, if the heater core hose blew and THEN it overheated then that would explain it. If it overheated and THEN the heater core hose blew, well then you have other issues. My car overheated one day, I changed the thermostat and beat the shit outta it on the highway then next day and it didn't overheat. The following day I was driving and then out of nowhere it just pegged to the H and my aftermarket gauge read 230F. Thats when I got fed up and started my head gasket repair. Last edited by IHateHacks; 03-27-2007 at 01:20 AM.

03-27-2007, 02:32 AM	#4
Kuban 3" Exhaust Join Date: Feb 2007 Location: Milwaukee, WI Posts: 174	hmm okay man. Maybe ill try just replacing the turbo and see how that goes. My friend has an extra i can try. If that doesnt do it ill replace the engine with a new built one. How much does a built mkiii with 550-650rwhp go for? Magenta color, mkiv rims, targa, body is immaculant. Apexi 7 way adjustables, eibach springs, new pads, new rotors, 285/40/17 tires in back, 245/45/17 tires in front, map-ecu tune. Ill list more later, but can i get like 9 maybe 10k for that? If its properly built? Last edited by Kuban; 03-27-2007 at 06:29 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bad Proportioning Valve?	georides	Non-Generation Specific Questions	5	03-05-2009 03:34 AM
valve cover gasket question?	sevenmgte	MKIII Supra	8	10-01-2008 06:02 AM
egr valve... reusable?	sd88supra	MKIII Supra	3	06-22-2007 06:28 AM
Front Main Seals	nickvash0104	MKIII Supra	5	01-08-2006 06:48 AM
Valve Stem Oil Seals	Roger UK	MKIII Supra	1	10-17-2005 01:24 PM

03-27-2007, 01:58 AM	#2
Kuban 3" Exhaust Join Date: Feb 2007 Location: Milwaukee, WI Posts: 174	yea the heater core hose blew initially, cause i saw the coolant behind me on the freeway (people getting out of my lane hahaha) and then the temp rose about 2 miles later. I looked at it and one of the plastic male to male adaptors for the heater core i used melted on one side causing it piss all the coolant out into my engine bay! i got a new one of those, filled it up with coolant and she was ready to roll! But when i drove about 10 miles, i heard the turbo doin that shit. Yea im assuming this was the issue all along, although would that cause those pcv issues i was describing?

03-27-2007, 02:09 AM	#3
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	Yes, if the turbo seals are shot, oil will get into the turbine housing and burn and oil will get into the compressor housing and neatly distribute itself all over your intercooler piping and intercooler. Now when you ran the motor without coolant I'm guessing the turbo took the brunt of it. Seeing how turbo's get so hot its not even funny, so without coolant cooling it, the bearings will be destroyed in short order.