|
|
05-17-2007, 01:59 AM
|
#1 |
|
20psi boost
Join Date: May 2006
Location: New Haven/Hamden
Posts: 793
 |
Blitz still kicks the shit out of a K&N anyday of the week.
|
|
|
|
05-17-2007, 02:09 AM
|
#2 |
|
walbro fp
Join Date: Mar 2006
Location: arizona
Posts: 432
|
Ive been using K&N air filters for some time now and ive never had a problem with them. Just my .2 cents.
__________________
MK3, Auto, Turbo. |
|
|
|
|
05-17-2007, 05:39 AM
|
#3 |
|
12psi boost
Join Date: Jun 2006
Location: salem mass
Posts: 329
|
ok well ill be replacing the cusiosn for the injectors as soon as they come and the cps o ring tommorow...ive started puttin it back together already...cant wait to have this sucker up and running again.
__________________
 nothing but the best -mods- so far K&N intake fipk 3" megan downpipe 3"turbo elbow 4 washers on the wastegate highflow cat short shifter 89+ front bumper, pic soon to come many more upgrades soon |
|
|
|
|
05-23-2007, 08:12 PM
|
#4 |
|
12psi boost
Join Date: Jun 2006
Location: salem mass
Posts: 329
|
ok well the supras back together.. i just have 1 question... on the throttle body...its facing the driver seat and its liek a little thing that connects to a vacuum line im guessing....where does this line come from and go to? cause i see the connector and no vaccum line. its on the back side of the throttle body facing the seat like sticking out of the t.b
__________________
nothing but the best -mods- so far K&N intake fipk 3" megan downpipe 3"turbo elbow 4 washers on the wastegate highflow cat short shifter 89+ front bumper, pic soon to come many more upgrades soon |
|
|
|
|
05-23-2007, 08:15 PM
|
#5 |
|
12psi boost
Join Date: Jun 2006
Location: salem mass
Posts: 329
|
and also, i have to put the passenger side timing gear on..how should i go about doing this..ive tried putting the timing belt on it and trying to pull it on but the belt restrics it. ive tried to move the pulley and was succesful but the belt just doesnt want to go on with the gear there
__________________
nothing but the best -mods- so far K&N intake fipk 3" megan downpipe 3"turbo elbow 4 washers on the wastegate highflow cat short shifter 89+ front bumper, pic soon to come many more upgrades soon |
|
|
|
|
05-24-2007, 02:44 PM
|
#6 |
|
12psi boost
Join Date: Jun 2006
Location: salem mass
Posts: 329
|
any1??????
__________________
nothing but the best -mods- so far K&N intake fipk 3" megan downpipe 3"turbo elbow 4 washers on the wastegate highflow cat short shifter 89+ front bumper, pic soon to come many more upgrades soon |
|
|
|
|
05-24-2007, 07:16 PM
|
#7 |
|
12psi boost
Join Date: Jun 2006
Location: salem mass
Posts: 329
|
ok i got the supra running and took it for a spin....but it wont rev past 2.1k rpm..it feels liek fuel cut..i dont know if its cause im out of gas that this is happening...i know of 2 possible things. my tps isnt calibrated, and theres a vaccuum leak on the side of my throttle body that is facing the driver...i see the connector but i dont know where to attach the other end of the hose to.
__________________
nothing but the best -mods- so far K&N intake fipk 3" megan downpipe 3"turbo elbow 4 washers on the wastegate highflow cat short shifter 89+ front bumper, pic soon to come many more upgrades soon |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| A/C Problem | schutz86 | MKIII Supra | 9 | 07-20-2008 06:08 PM |
| Second half of the season begins in Aug… | Guest | Off Topic Forum | 2 | 07-19-2005 10:53 AM |
Hybrid Mode
