need mechanic or any sort of help!

xs87supra · 12-15-2006, 06:42 AM

first time i have tried this out..i have already taken some stuff out..last things i need to do is disconnect the power steering and the 2 remaining bolts holding the engine and the tranny housing together..i have the cherry picker n tools, but i dont want to try this on my own because the mech. i had wasnt very reliable.

jeepkaiser65 · 12-15-2006, 06:49 AM

Where are you at?

xs87supra · 12-16-2006, 04:03 AM

Quote:

Originally Posted by jeepkaiser65

Where are you at?

im in socal..off the 605 freeway at carson

jeepkaiser65 · 12-16-2006, 06:36 AM

Since I odnt know where thats at, I will asume its far

GoddardJock · 12-16-2006, 05:10 PM

Keep looking for a mechanic. If you are sure of your ability to re-asemble the engine you already had in there then i would give you the green light. Take pictures if you must to save images you won't be able to remember. I never start a project like that without pictures. Only safe guarantee. Good Luck!

jeepkaiser65 · 12-16-2006, 08:37 PM

X2 Just make sure you label and bag your bolts, nuts, etc. also label your wiring take as many pics as possible from diffrent angles. Most important, ask questions here. There is no dumb questions, just dumbmistakes made by not asking questions. Measure twice cut once kinda thing.

xs87supra · 12-16-2006, 10:42 PM

thanks for the tips guys..im going to pull the engine and tranny out tomorrow with some help from a friend..thank you!

12-15-2006, 06:49 AM	#2
jeepkaiser65 3" Exhaust Join Date: Sep 2006 Location: san antonio Tx Posts: 68	Where are you at? __________________ Id rather die on my feet then live on my knees

12-16-2006, 06:36 AM	#4
jeepkaiser65 3" Exhaust Join Date: Sep 2006 Location: san antonio Tx Posts: 68	Since I odnt know where thats at, I will asume its far __________________ Id rather die on my feet then live on my knees

12-16-2006, 08:37 PM	#6
jeepkaiser65 3" Exhaust Join Date: Sep 2006 Location: san antonio Tx Posts: 68	X2 Just make sure you label and bag your bolts, nuts, etc. also label your wiring take as many pics as possible from diffrent angles. Most important, ask questions here. There is no dumb questions, just dumbmistakes made by not asking questions. Measure twice cut once kinda thing. __________________ Id rather die on my feet then live on my knees

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good And Honest Mechanic	kidsusukigsxr	Shops & Part Reviews	4	02-16-2009 01:21 AM
Mechanic says it’s not the head gasket.	87 Supra	MKIII Supra	23	03-29-2008 03:01 AM
talking with mechanic?	scruffboy	Non-Generation Specific Questions	4	04-18-2007 03:03 AM
HELP... DOES 7MGTE Have some sort of govenor chip?	pei09	MKIII Supra	3	04-21-2006 08:40 AM
anyone in st louis? a mechanic...?	89targa	MKIII Supra	0	08-12-2005 10:30 PM

12-15-2006, 06:42 AM	#1
xs87supra Intake Join Date: Aug 2005 Posts: 32	first time i have tried this out..i have already taken some stuff out..last things i need to do is disconnect the power steering and the 2 remaining bolts holding the engine and the tranny housing together..i have the cherry picker n tools, but i dont want to try this on my own because the mech. i had wasnt very reliable.

12-16-2006, 05:10 PM	#5
GoddardJock Stock Join Date: Jul 2006 Location: Kansas Posts: 7	Keep looking for a mechanic. If you are sure of your ability to re-asemble the engine you already had in there then i would give you the green light. Take pictures if you must to save images you won't be able to remember. I never start a project like that without pictures. Only safe guarantee. Good Luck!

12-16-2006, 10:42 PM	#7
xs87supra Intake Join Date: Aug 2005 Posts: 32	thanks for the tips guys..im going to pull the engine and tranny out tomorrow with some help from a friend..thank you!