windows locks and seats

SupraDupra · 11-02-2006, 09:55 PM

Possibly knocked out a breaker on the fuse panel?
From my Supra manual...

"To reset a manual circuit breaker, first disconnect the cable from the negative battery terminal.Remove the circuit breaker, insert a pin into the reset hole and push in..."

Unfortunately my scanner is not working at the moment ,but it's a semi-round block with a hole in it.Best of luck to you.

west_side_supra · 11-03-2006, 10:40 PM

well i tested it out, and the circut breaker is not wanting to stay engaged, i dissconnected the neg. and pulled it out, then poked it and it keeps clicking back out. i grabed a diffrent circut breaker and put it in the same spot and it does the same thing, so does this mean that there is a bad ground somewhere? if so where would it be located?

thanks again guys

11-02-2006, 09:55 PM	#1
SupraDupra 3" Exhaust Join Date: Oct 2006 Location: Cleveland OH Posts: 129	Possibly knocked out a breaker on the fuse panel? From my Supra manual... "To reset a manual circuit breaker, first disconnect the cable from the negative battery terminal.Remove the circuit breaker, insert a pin into the reset hole and push in..." Unfortunately my scanner is not working at the moment ,but it's a semi-round block with a hole in it.Best of luck to you. __________________ 1988 Supra - N/A 5 speed 1974 'Cuda - 318 2001 Cherokee

11-03-2006, 10:40 PM	#2
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	well i tested it out, and the circut breaker is not wanting to stay engaged, i dissconnected the neg. and pulled it out, then poked it and it keeps clicking back out. i grabed a diffrent circut breaker and put it in the same spot and it does the same thing, so does this mean that there is a bad ground somewhere? if so where would it be located? thanks again guys