10-08-2006, 10:20 PM
|
#1 |
|
Intake
Join Date: May 2005
Posts: 37
 |
i need help
I have a 1988 non turbo supra i had to pull the motor and rebuild it after it spun a bearing on the rod anyway it is back in there now and i have got everything hooked up the way it is supposed to be everything has power but it has no spark i have power going to my coil and i have power from the coil and into the distributor but anywere after that i have no spark so any help would be greatly appreciated please
|
|
|
|
10-09-2006, 03:38 AM
|
#2 |
|
20psi boost
Join Date: Jun 2006
Location: Chicago
Posts: 706
|
test the distrubter?
|
|
|
|
|
10-09-2006, 05:04 AM
|
#3 |
|
500whp yet?
Join Date: Aug 2005
Location: Plantation, Fl.
Posts: 1,052
|
Hows the distributor rotor on it? Check the gap in the plugs. Maybe a bad ignitor? What does it do when you try to start it?
|
|
|
|
|
10-09-2006, 09:00 PM
|
#4 |
|
Intake
Join Date: May 2005
Posts: 37
|
the distributor is good
my distributor is good and when i try to start it all it does is crank over and over it has no spark and we just found out today that there is no spark directly from the coil
|
|
|
|
 |
|
|
Linear Mode
