7mgte or 1jzgte parts

sr_xaiko · 08-14-2006, 12:11 AM

well i've been doing some research and people are saying that it is very easy for the 7mgte to do 400 rwhp. I'd be fine with that, so I'm not to sure with swapping anymore. Now i'm just trying to figure out how to get to 400 rwhp. Do all I have to do is upgrade my turbo and get a 3inch downpipe and exhaust and just up the boost up to 20psi. Or will the internals not beable to handle that 20psi. Or I guess what i'm trying to say is what parts will I need to reach 400rwhp.

frostburn · 08-14-2006, 11:50 AM

well i dont know about 400 but... first off... id put a K&N air filter ( very cheap, payed 220 CDN for mine ) then get a walbro 255 fuel pump which is 105 on ebay brand new... also... u might want to get your hg torqued but make sure the bolts can handle it and dont snap in 2... umm the 550 stock injectors should be fine... but also... you need a 3" full turbo back exhaust system... also... might wanna get your turbo ported... for more air flow at the waiste gate...umm... all i can think of right now just got off midnight shift tired as hell... ttyl sorry if this doesnt help any, but also... on the 20psi comment u better make dam sure the head gasket can get torqued or it will just blow anyways... 20 is a big number to aim for right away i'd try 15-16 at first... but u may need to upgrade the turbo, a T04p or a T70 would do a nice job... ttyl sleep time

sr_xaiko · 08-14-2006, 03:56 PM

oh alright I see, yea that helped out alot. I guess the head gasket is a big thing, so i'll take care of that first and i'm taking it that i'm going to need new head bolts so that they don't break umm oh and what should I be torquing it down to so that the head gasket will be safe.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7MGTE vs 1JZGTE	thechori	MKIII Supra	16	10-01-2009 10:09 PM
parts needed for 7mgte swap	tone loc	Non-Generation Specific Questions	9	08-08-2006 04:46 AM

08-14-2006, 12:11 AM	#1
sr_xaiko Stock Join Date: Aug 2006 Location: milwaukee Posts: 3	well i've been doing some research and people are saying that it is very easy for the 7mgte to do 400 rwhp. I'd be fine with that, so I'm not to sure with swapping anymore. Now i'm just trying to figure out how to get to 400 rwhp. Do all I have to do is upgrade my turbo and get a 3inch downpipe and exhaust and just up the boost up to 20psi. Or will the internals not beable to handle that 20psi. Or I guess what i'm trying to say is what parts will I need to reach 400rwhp.

08-14-2006, 11:50 AM	#2
frostburn 3" Exhaust Join Date: Jun 2006 Location: ontario CA Posts: 128	well i dont know about 400 but... first off... id put a K&N air filter ( very cheap, payed 220 CDN for mine ) then get a walbro 255 fuel pump which is 105 on ebay brand new... also... u might want to get your hg torqued but make sure the bolts can handle it and dont snap in 2... umm the 550 stock injectors should be fine... but also... you need a 3" full turbo back exhaust system... also... might wanna get your turbo ported... for more air flow at the waiste gate...umm... all i can think of right now just got off midnight shift tired as hell... ttyl sorry if this doesnt help any, but also... on the 20psi comment u better make dam sure the head gasket can get torqued or it will just blow anyways... 20 is a big number to aim for right away i'd try 15-16 at first... but u may need to upgrade the turbo, a T04p or a T70 would do a nice job... ttyl sleep time

08-14-2006, 03:56 PM	#3
sr_xaiko Stock Join Date: Aug 2006 Location: milwaukee Posts: 3	oh alright I see, yea that helped out alot. I guess the head gasket is a big thing, so i'll take care of that first and i'm taking it that i'm going to need new head bolts so that they don't break umm oh and what should I be torquing it down to so that the head gasket will be safe.