so you say I have a BHG??

"sharp" · 06-24-2006, 10:55 PM

yeah its and 86.5. I was thinking the same thing about rebuilding it while i had it all apart. so any idea on what this is going to cost or how much time i will need to complete the job? just replacing the gasget not with the rebuild.

stumpjumper · 06-24-2006, 11:42 PM

$100 for the arp bolts

$2-300 for the cylinder head rebuild and milled
$75-120 for the gasket set

so roughly $500. Good time to replace the spark plugs, timing belt and the cooling system including the heater hoses in the rear of the engine bay.
Labor is about 6-12 hours depending on skill level.
Just make sure you clean everything up real well, keep track of all the nuts, bolts and connectors and take your time. You will learn a lot from this job.

h8z2luze · 06-25-2006, 03:23 AM

I am in the middle of one right now

Havent even got to drive my supra yet lol.

06-25-2006, 03:23 AM	#3
h8z2luze 12psi boost Join Date: May 2006 Location: Nor*Cal Posts: 338	I am in the middle of one right now Havent even got to drive my supra yet lol. __________________ 1989 Supra 7MGE MK3 5-speed project... http://www.cardomain.com/ride/2385505

06-24-2006, 10:55 PM	#1
"sharp" Stock Join Date: Jun 2006 Location: california Posts: 6	yeah its and 86.5. I was thinking the same thing about rebuilding it while i had it all apart. so any idea on what this is going to cost or how much time i will need to complete the job? just replacing the gasget not with the rebuild.

06-24-2006, 11:42 PM	#2
stumpjumper 3" Exhaust Join Date: Dec 2005 Posts: 74	$100 for the arp bolts $2-300 for the cylinder head rebuild and milled $75-120 for the gasket set so roughly $500. Good time to replace the spark plugs, timing belt and the cooling system including the heater hoses in the rear of the engine bay. Labor is about 6-12 hours depending on skill level. Just make sure you clean everything up real well, keep track of all the nuts, bolts and connectors and take your time. You will learn a lot from this job.