New life for old Sawblades!

theWeezL · 06-21-2006, 04:00 PM

While the can says not to get it on rubber, I didnt bother masking off the tires, but I did try not to get the stuff on the sidewalls. To get the edge of the rim you have to get some on the tires though. I sprayed my first wheel in the evening, and went to do something while it was working....and forgot about it untill the next morning. I saw no I'll effects on the rubber.

So, in short...no, doesnt seem to bother the tires at all.

damdog05 · 06-21-2006, 05:12 PM

dude..that is amazing. now alls we have to do is find a shiny center cap or something thatll make em shiny. but seriously good job on the wheels, im going to try it on mine soon.

theWeezL · 06-21-2006, 06:11 PM

Well, there are better "chrome look" paints on the market now. One of those that has a 2 or 3 step process should work. Something like a base coat, color coat, clear combination should reproduce the look of the new wheels...I would try to experiment with em but these wheels were on my parts car and Im just gonna sell em soon anyways.

burton51m · 06-21-2006, 07:29 PM

2 things....

1st- could you do this to a 5 spoke supra rim and get the same results? someone should try it.

2nd- after stripping the paint off the sawblades would the aluminum act wierd with nothing protecting it..like corrode or form some stuff on it because of it being bare?
jw..

theWeezL · 06-22-2006, 01:20 AM

1st - yes, I can see no reason why not

2nd - no, most aluminum rims have no paint on them, its what allows you to polish them. Only the cheap aluminum rims have a clear coat on them. Its prone to peeling and cracking and yellowing too.

jfunez · 06-22-2006, 02:48 AM

probably you can use a polish like "Mothers" that leave a teflon coating after you polish them, this will prevent any dullness or water marks in the near future....

Supra2NR · 06-22-2006, 04:25 AM

nice one weezl, i read about this b4 too, but too lazy to do it, but that new look on the rims convinced me handsdown, how many cans did you have to use for all four?

theWeezL · 06-22-2006, 05:59 AM

Quote:

Originally Posted by jfunez

probably you can use a polish like "Mothers" that leave a teflon coating after you polish them, this will prevent any dullness or water marks in the near future....

Yeah I hit the one I pictured with Mothers using a powerball, took less than 10 minutes to polish it to a mirror shine.

06-21-2006, 04:00 PM	#1
theWeezL 12psi boost Join Date: May 2006 Location: Oregon Posts: 376	While the can says not to get it on rubber, I didnt bother masking off the tires, but I did try not to get the stuff on the sidewalls. To get the edge of the rim you have to get some on the tires though. I sprayed my first wheel in the evening, and went to do something while it was working....and forgot about it untill the next morning. I saw no I'll effects on the rubber. So, in short...no, doesnt seem to bother the tires at all. __________________ *____________* *Eagles may soar, but weezl's never get sucked into jet engines!*

06-21-2006, 05:12 PM	#2
damdog05 12psi boost Join Date: Apr 2006 Location: Georgia Posts: 250	dude..that is amazing. now alls we have to do is find a shiny center cap or something thatll make em shiny. but seriously good job on the wheels, im going to try it on mine soon. __________________ My cars: 85 Trans Am- Ehhh- Gone 83 Rx7- Much Better- Gone 86.5 Supra- Love- Not Gone

06-21-2006, 06:11 PM	#3
theWeezL 12psi boost Join Date: May 2006 Location: Oregon Posts: 376	Well, there are better "chrome look" paints on the market now. One of those that has a 2 or 3 step process should work. Something like a base coat, color coat, clear combination should reproduce the look of the new wheels...I would try to experiment with em but these wheels were on my parts car and Im just gonna sell em soon anyways. __________________ *____________* *Eagles may soar, but weezl's never get sucked into jet engines!*

06-21-2006, 07:29 PM	#4
burton51m Lexus & 550's Join Date: Feb 2006 Location: Canton, OH Posts: 536	2 things.... 1st- could you do this to a 5 spoke supra rim and get the same results? someone should try it. 2nd- after stripping the paint off the sawblades would the aluminum act wierd with nothing protecting it..like corrode or form some stuff on it because of it being bare? jw.. __________________

06-22-2006, 01:20 AM	#5
theWeezL 12psi boost Join Date: May 2006 Location: Oregon Posts: 376	1st - yes, I can see no reason why not 2nd - no, most aluminum rims have no paint on them, its what allows you to polish them. Only the cheap aluminum rims have a clear coat on them. Its prone to peeling and cracking and yellowing too. __________________ *____________* *Eagles may soar, but weezl's never get sucked into jet engines!*

06-22-2006, 02:48 AM	#6
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	probably you can use a polish like "Mothers" that leave a teflon coating after you polish them, this will prevent any dullness or water marks in the near future....

06-22-2006, 04:25 AM	#7
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	nice one weezl, i read about this b4 too, but too lazy to do it, but that new look on the rims convinced me handsdown, how many cans did you have to use for all four? __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i want an easy life	ianstaley	MKIII Supra	2	12-17-2008 08:04 PM
New Life For Interior	Supra2NR	MKIII Supra	11	08-10-2006 07:52 PM
painted sawblades	Supra2NR	MKIII Supra	12	08-01-2006 08:27 AM
singing i have no life, lada	j3pz	Off Topic Forum	6	12-09-2005 03:15 AM