7m-gte swap problems

skateboarder0102 · 06-03-2006, 04:40 AM

i swaped a jdm 7m-gte with 550 injectors and a lexus afm. at first the car didnt run right so i put the cam angle sensor/distributor coreclty and it ran better. The person that had the car before me put new clips in for the fuel injectors and i figured that the clips will go in order to the fuel injectors. The last two clips are like right next to each other so i tried it both ways and i think i got it in right. now the car just wants to die right away with out me being on the gas when i turn it on. so i ajusted the throttle body so the car will stay alive. now when i drive it the blow of valve does not want to go of at all. i have a turbo smart bov with some custom piping. when i shift gears and give it gas it wants to stutter for a bit and then if finnaly goes. why does my blow of valve not want to go of i looked at it with a friend and it looks fine. would i have a vacumm leak some were in my piping. i actually looked for leaks and cant find anything.

White87Turbo · 06-04-2006, 01:11 AM

Im having the same problem with mine and cant figure out what it is. Im running a stock bov so im guessing its something other than that.

jfunez · 06-08-2006, 03:09 AM

i dont know, but it sounds like a leak somewhere....

06-03-2006, 04:40 AM	#1
skateboarder0102 Stock Join Date: Jul 2005 Posts: 3	7m-gte swap problems i swaped a jdm 7m-gte with 550 injectors and a lexus afm. at first the car didnt run right so i put the cam angle sensor/distributor coreclty and it ran better. The person that had the car before me put new clips in for the fuel injectors and i figured that the clips will go in order to the fuel injectors. The last two clips are like right next to each other so i tried it both ways and i think i got it in right. now the car just wants to die right away with out me being on the gas when i turn it on. so i ajusted the throttle body so the car will stay alive. now when i drive it the blow of valve does not want to go of at all. i have a turbo smart bov with some custom piping. when i shift gears and give it gas it wants to stutter for a bit and then if finnaly goes. why does my blow of valve not want to go of i looked at it with a friend and it looks fine. would i have a vacumm leak some were in my piping. i actually looked for leaks and cant find anything.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
mkII common problems..and swap??	the_trooper08	MKII Supra	0	09-04-2007 02:11 PM
1JZGTE swap question	supradaddy0803	MKIII Supra	1	04-12-2007 04:56 PM
problems, problems, and problems	tone loc	MKIII Supra	6	09-06-2006 04:35 AM
89 Supra Turbo w/1JZ Swap Problems	Donnies Foreign Car	Non-Generation Specific Questions	1	02-02-2006 05:03 PM
PROBLEMS WITH MY TURBO SWAP	Supra GuestOBRUT89	Non-Generation Specific Questions	3	03-14-2005 06:51 AM

06-04-2006, 01:11 AM	#2
White87Turbo Intake Join Date: May 2006 Location: Lexington, KY Posts: 41	Im having the same problem with mine and cant figure out what it is. Im running a stock bov so im guessing its something other than that.

06-08-2006, 03:09 AM	#3
jfunez 12psi boost Join Date: Oct 2005 Location: georgia,usa Posts: 338	i dont know, but it sounds like a leak somewhere....