custom intake ?'s

[burton51m]

couple questions...

1.when you moved the afm did u have to extend any wires or do any cutting or does it just move up there pretty easy?
2.the air duct...did that connect directly to your cone filter or is it sitting there?
3.is there a website to get the pipe from?i tried pepboys.com. and the coupler in red,the 45deg one, was that the stock one?

[Supra2NR]

the afm was no problem at all, the wires will fit perfectly to its new position, no cuttin involved with this all you need is clamps to hold it in

the air duct has a coupler in the end and i used zip ties and i used the old harness where the old filter bolts on to as an anchor so it wont fall if i hit a bump or anything, but the hole on top of the filter is 2.5 inches and it secures pretty good with the step down coupler

the 45 degree coupler was used in the car b4 , the old owner maed a semi-cold air intake, which was not even good , nd i jusd used it when i was improvising my intake, you can find those at any good shops jus ask for it , cuz the shop that i go to can even custom fit me one in any color , but thats jus for looks for me and i will do that later on

hopefully i was any help to u and good luck

look at this pic thats the old setup that he did , its was pretty crappy cuz it wasnt even sealed, and god knows what got into the engine with his dumbass, but this is where i got the 45 deg. maybe if u look at the stock system u can salvage one from it too

[Supra2NR]

one more thing i almost forgot, there is one hose that goes to ur intake hoses that u wont have anywhere to put when u do the piping for the cold air intake

here's a solution that i did :

buy those breathers from pepboys too,
take out the hose from where its connected to idk what its called but its by the oil filter.

theres a snag in this process: the breather is too big for the thing that u put in it,
solution: cut off a segment from the old hose then put it inside the breather so the hole will get tighter then put it in and jus use a clamp to hold it down hopefully that helps

got pics but crappy phone tho

[burton51m]

one last thing...
to make it plain and simple, i dont get how you did the things in yellow in the attachment below.
-first circle (top) i dont get how you attached the end of the AFM to the piping
-second circle- piping to the filter

and for pepboys did u order online for their pipes and breathers or what?