|
|
|
|
#1 |
|
3" Exhaust
Join Date: Sep 2005
Location: Corinth, Maine
Posts: 116
![]() |
yes thank you i want to buy a 7mgte and take out my practically new 7mge then sell both my 7mge's (one with serious rod knock) to buy new parts for my gte
__________________
87 N/A with a new JDM 7mge. Looking for a 7mgte |
|
|
|
|
|
#2 |
|
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
![]() ![]() |
i'm not sure about usdm but from what i can tell in jdm (pretty similar i should imagine) you need to just rewire one plug at the fusebox as they use a different type of plug but wire colours are the same
and do the resistor change in the tacho i'm sure someone here has a link to that somewhere
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me ![]() Pics of my build. "Good girls are just bad girls that don't get caught" ![]() Do a diagnostic first! |
|
|
|
|
|
#3 |
|
3" Exhaust
Join Date: Mar 2006
Location: London
Posts: 69
![]() |
I know about the tacho - thats covered under the conversion notes page i pasted above - but i thought you had to use the whole 7M-GTE loom because it uses a coil pack and different ignition?
__________________
![]()
|
|
|
|
|
|
#4 |
|
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
![]() ![]() |
of course hence you need to change the body harness plug as 7mgte harness don't fit 7mge body harness
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me ![]() Pics of my build. "Good girls are just bad girls that don't get caught" ![]() Do a diagnostic first! |
|
|
|
|
|
#5 |
|
3" Exhaust
Join Date: Mar 2006
Location: London
Posts: 69
![]() |
Damn - now *i'm* confused!!
__________________
![]()
|
|
|
|
|
|
#6 |
|
3" Exhaust
Join Date: Sep 2005
Location: Corinth, Maine
Posts: 116
![]() |
wait so what do i need to cahnge on the wiring harness to the body?
__________________
87 N/A with a new JDM 7mge. Looking for a 7mgte |
|
|
|
|
|
#7 |
|
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
![]() ![]() |
on the body harness by the fusebox is a bright yellow plug (pretty sure it's bright yellow) that one is the one you need to rewire as the 7mgte wiring harness has a mustard/dark yellow plug which is a different shape
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me ![]() Pics of my build. "Good girls are just bad girls that don't get caught" ![]() Do a diagnostic first! |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|