Idle going up and down

f00g00 · 05-24-2006, 08:24 PM

ok TSRM says its a 10mm hex so Ill go with that.

mrnickleye · 05-24-2006, 10:59 PM

You'll need a 3/8" drive 10 mm allen socket. At least 4-6" long, to fit down beside the cams.

Be sure to torque down to 72 ft lbs.

05-24-2006, 10:59 PM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	You'll need a 3/8" drive 10 mm allen socket. At least 4-6" long, to fit down beside the cams. Be sure to torque down to 72 ft lbs. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

05-24-2006, 08:24 PM	#1
f00g00 12psi boost Join Date: Aug 2005 Location: Kuwait Posts: 292	ok TSRM says its a 10mm hex so Ill go with that.